Chemical Anti-corrosion SUS316 Immersion Heater
Tank Heater
YIQUAN SUS316 immersio heaters are designed for the demands of corrosive chemical heating, with a vast array of configurations available such as open tank, screw plug and flange. We offer sizes as small as 500 watts for laboratory environments and as large as 50,000 watts for industrial applications.
Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our certifications include CE and ISO9001:2008.
Detailed information:
1. The heaters are made of superior seamless SUS316 tubes, with the shape classified into vertical shape, “L” shape and “Z” shape, etc. Or can be custom-made according to customer's design.
2. Power of the heating tube is designed according to the location of installation, liquid chemical properties and the deposition of the solid contents in liquid in order to insure diameter of the tube, the normal specification are 11mm, 16mm, 19mm, 25mm, 38mm, 45mm and 50mm.
3. Tubes of 11mm and 16mm are heat-shrinkable, its surface power is about 5-10W/Cm2, which is applicable to heat in the liquid with good liquidity and little solid deposition.
4. Tubes of 45mm are designed with low surface power, with good durability, which specially applies to circuit board.
5. With voltage of 110V/P,220V/P,380V/P,220V/3P,380V/3P,415V/3P and power range from 0.5KW to 50KW.
6. All SUS316 immersion heaters can be used with overheat protection switches or heat detector.
7. All SUS316 immersion heaters reach the international standard, which insure the reliability and service life.
Application case:
Our Expo: