Cheap price titan boat engine outboard motor for sale

Advantage

1.Low fuel consumption

2.Ultra strong anticorrosion

3.Integrated CDI igniting system

4.New technology,lighter weight

5.Long service life

6.Convenient maintenance

7.High efficiency

8.Low noise

9.Reliable operation

10.Good starting and running performance

Selection table

Instructions for use

 1. The first 10 hours of the new machine belongs to the running-in period. The new machine needs to be added to the 4-stroke engine oil for the outboard machine. Please refer to the instruction manual for the amount of oil (connect the oil pipe, the oil pipe arrow is connected to the upper end of the oil pipe, and loosen the ventilation on the fuel tank cap. Bolts, pump oil, propellers and water inlets are placed in the water. The gear position is in the neutral position. Pull out the choke valve and insert the red flameout rope to start the engine. Immediately after the machine starts, push back the choke.

2. After starting, observe the outflow hole of the outboard motor cooling water, and there should be enough water to drain (if there is no immediate shutdown check).

3. Before sailing or before stopping the engine, run at idle for 3 minutes to warm up or cool the engine.

4. The gear should be fast and in place (need to be carried out under idle speed, otherwise it will break the gear). When accelerating, the throttle should be added slowly.

5. Change the oil after 10 hours of running-in period, and change the oil every 3-6 months, depending on the usage.

6. After 10 hours, replace the gear oil. When the replacement is full, it will be injected from the bottom up. No professional tools can be injected from top to bottom.

7, cherish the water source, do not dump the waste oil at will.

8. The outboard engine warranty must use the original outboard engine oil (4-stroke engine oil) and gear oil (for outboard engines). Please read the engine manual for details.

Our service

Certification

Contact us