Introduction of Resin Craft Mold Silicone
Resin handicraft mold silica gel is a special mold silica gel for resin handicrafts. It has high temperature resistance and can withstand the high temperature of resin raw materials. It is the first choice for the manufacture of resin handicrafts and silicone molds.
Resin handicraft mold silicone use
Resin handicraft mold silicone is suitable for the production of various handicraft silicone molds, such as: glass resin, epoxy resin, Pu resin, lighting, candles and other handicraft complex molds and precision mold manufacturing. Whether it is a large complex piece or a small piece with fine patterns, it can be replicated well.
Delivery Time
* Depends on the express you choose and the destination
* Via Express:General 3-7 business days worldwide
Shipping Cost
* Based on the weight of the goods and the destination
Package
* We have 1kg/bottle, 5kg/bottle, 25kg/bottle/drum, 200kg/drum, or your requirement
Product name | RTV-601 |
Ingredient | Synthetic silicone rubber |
Exterior | Translucent fluid |
Viscosity | 280,000±3,000cps |
Hardening situation | |
Hardener addition ratio | Brush mold 2.0~3.0% |
The less the proportion of hardener added, the softer the mold, please pay attention to the amount of addition. | |
Brushing operation time | Working time: 10-20 minutes, Fingerprint time: 30-50 minutes. |
Filling operation time | Working time: 20-30 minutes, Demolding time: 3-5 hours. |
The above data is for reference only. Please refer to the current temperature, humidity and weather for the actual addition ratio. | |
Physical properties after hardening | |
Hardness, shore A | 25±2 |
Tensile strength Mpa | 3.5±0.3 |
Tear strength, N/mm: | 21±2 |
Linear shrinkage rate,% | ≤0.3 |
Elongation,% | 450±50 |
Resin crafts mold silicone characteristics
1. The product can withstand high temperatures from 180°C to 300°C. If special burn-resistant materials are added, the high temperature resistance will be higher;
2. Shrinkage rate <1‰;
3. Good properties such as tensile strength and tear resistance;
4. The made mold has many times of turning over, and has a long service life, which is more cost-effective than ordinary silica gel;
5. The product hardness, curing time and color can be adjusted according to customer needs.
Resin handicraft mold silicone parameters | ||||||
colour | White/translucent | |||||
Hardness (Shore A) | 15±2 | 20±2 | 25±2 | 30±2 | 33±2 | 40±2 |
Vulcanizing agent addition | 2-3 | |||||
Dynamic viscosity (mPa.s) | 1.3w±0.2w | 1.7w±0.2w | 2.5w±0.2w | 2.7w±0.2w | 2.5w±0.2w | 1.5w±0.2w |
Tensile strength (MPa) | 2.5 | 2.8 | 3.4 | 4 | 3.5 | |
Tearing strength (KN/m) | 16±2 | 19±2 | 24±2 | 25±2 | 21±2 | |
Elongation(%) | 380 | 530 | 410 | 420 | 450 | 180 |
Density (g/cm³) | 1.08 | 1.09 | ||||
Operating time (min) | 30-50 | 30-40 | 30-50 | |||
Curing time (h) | 4-5 | 3-4 | 4-5 | |||
Linear shrinkage rate (%) | 0.3 | |||||
Conventional packaging | 25KG |
Note: The above parameters are only conventional parameters. If you have special requirements, please contact our company; after curing, the hardness, viscosity, and operating time can be specially adjusted and provided according to customer needs.
Resin crafts silicone mold making
1. Mix the mold glue and curing agent according to the weight ratio of 100:2~3 to mix and stir evenly;
2. Put the mixed and evenly mixed silica gel into a vacuum machine to vacuum and remove bubbles. The advantage of this is to make the finished product smooth and bubble-free (without a vacuum machine, the curing time can be prolonged and the bubbles can be discharged naturally But the effect is not very satisfactory);
3. Spray (coating) a layer of release agent on the already made mold and mold frame, fix the mold in the middle, and slowly and steadily pour the bubbled liquid silicone into the mold frame until the silicone is completely Cover the mold and wait for it to solidify completely;
4. After the mold silicone is completely cured, the mold can be demolded, and the silicone mold can be taken out for edge treatment;
5. Generally, the silicone mold is recommended to be put into use after being placed for 24 hours, and the best use effect of the mold can be exerted.
Resin handicraft mold silicone operation attention
1. It is not recommended to add silicone oil during the operation. If you must add it, please consult your supplier for the proportion of addition. Do not add it yourself, which may cause the performance of the silicone to decrease;
2. The proportioned silica gel should be used up within the operating time as soon as possible to avoid waste of raw materials;
3. The silica gel and curing agent must be mixed evenly to prevent the phenomenon of non-curing of the silica gel;
4. This product belongs to condensation mold silicone and cannot be mixed with addition molding silicone.