Cheap Portable Polyurethane Pu Spray Foam Machine For Wall Roof Tank Container Insulation
Cheap Portable Polyurethane Pu Spray Foam Machine For Wall Roof Tank Container Insulation is used to spray coating two-component liquid materials for Exterior Interior wall, Roof, Tank, cold storage spraying insulation. It can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc. The new model CNMC-E3 & CNMC-65 air driven proportioning unit is an advanced and compact design. It is specially aimed at the applications of polyurethane foam in place. Its particular configuration facilities easy access to all its components, simplifies the control functions and significantly reduces the maintenance work.
Features:
1. The use of a large power cylinder makes the spraying more powerful and the atomization effect better.
2. The heated hose of the new Upgrade machine CNMC-E3 heats up faster. In cold winter, the machine can pre heat
the foam chemicals rapidly to help save time and improve spraying effect and foaming effect. Equipped with a reflux
valve, it is very convenient for the operator to cycle the chemicals.
3. The machine contains the electric leakage protector to prevent machine leakage and human electric shock, and
improve the safety performance of the machine.
4. Adding Voltmeter and Ammeter , so the voltage and current conditions inside the machine can be detected.
5. Appearance design conforms to the principle of artificial mechanics, moving the machine is easier.
6. The heated hose is with internal heating and low voltage current, to protect the operator's personal safety to
the greatest extent.
7. The quick opening door is installed ,Machine maintenance and repair and inspection will be more convenient
Pu Spray Foam Machine CNMC-E3 Details:
Pu Spray Foam Machine CNMC-65:
Here is the most economic high pressure Pu Spray Foam Machine to use for none power source places. These are our recommendation reasons:
1. Internal mix type: Build-in mix system in the spray gun, to make even mixture 1:1 fixed mix ratio.
2. High viscosity and low viscosity liquid materials can be sprayed.
3. The paint is environmentally friendly, and the splashing waste of the paint mist is relatively small.
4. No need any electric power source, suitable for electricity lack construction area and porjects, very portable and easy to operate, very good and economic choice!
Model |
CNMC-E3 Pu Spray Foam Machine |
Power source |
220V/110V/380V 50/60HZ |
Heating power |
7.5KW |
Driven mode |
pneumatic |
Air source |
0.5~0.8 MPa ≥0.9m³/min |
Raw output |
2~12 kg/min |
Maximum output pressure |
17Mpa |
AB material output ratio |
1:1 |
Max hose support |
90m |
Complete set list: | |
Main machine |
1 set |
Spray gun |
1 Set |
Feeding pump |
2 sets |
Heated hose |
15meters |
Spare parts tool box |
1set |
Operation manual and video |
1 copy |
Kelly Contat Information |
|
cnmc006@chnmach.com |
|
Skype | +8615033444582 |
Whats App |
+8615033444582 |
Telephone |
+8615033444582 |