KEY BENEFIT
Silicon strain gauge sensors successfully field proven in many thousands of installations.
Simple, elegant sensor packaging uses very few parts to achieve exceptionally high reliability
Transmitter available with traditional or low profile structures (see photos above).
Aluminum housing has durable, corrosion resistant epoxy finish; 316 ss housing also available; both meet NEMA 4X and IP66 ratings.
Can be provided as a sealed measurement system with numerous configurations of direct connect or capillary connected seals available.
SIL2-Certified Transmitter offered as an option.
Optional mounting bracket sets allow pipe, surface, or manifold mounting of transmitter.
Remote configuration with HART communication protocol in a single loop or multidrop mode; or
locally via optional LCD indicator.
Multi-marking is available for FM, CSA, and ATEX intrinsically safe installations. The user determines
and permanently marks on the data plate the certification to be applied.
User-entered cutoff point from 0 to 20% of maximum flow.
Dual Seal certified by CSA to meet ANSI/ISA 12.27.01-2003 requirements.
Industry standard 316L ss, Co-Ni-Cr, Nickel alloy (equivalent to Hastelloy® C(1)), Monel, or Tantalum
sensor materials, depending on transmitter structure.
Hastelloy is a registered trademark of Haynes International, Inc.
Complies with NAMUR NE 21 interference immunity requirement, and NAMUR NE 43 for analog output overrange and underrange annunciations.
CE Marked; complies with applicable EMC, ATEX, and PED European Directives.
Complies with Electromagnetic Compatibility Requirements of European EMC Directive 2004/108/EC by conforming to the following EN and IEC Standards: EN 61326-1, and IEC 61000-4-2 through 61000-4-6.
Designed for hazardous area installations. Versions available to meet Agency flameproof and
zone requirements.Liquid Crystal Display (LCD) digital indicator with on-board pushbutton configuration and calibration.
NEMA 4X and IEC IP66 durable epoxy-coated aluminum, or 316 ss housings.
Co-Ni-Cr, 316L ss, and Nickel alloy (equivalent to Hastelloy®(1)) sensor materials for all transmitters.
Integral process connections for sanitary, and pulp/paper installations.
Choice of Mounting Styles: IDP10 for compact light weight and direct-to-process mounting (bracket optionally available
Rugged & Dependable: Field-proven silicon strain gauge technology and corrosion-resistant epoxy finish
Superior Performance: High accuracy to 0.05% of calibrated span in the digital linear mode, and 0.06% of calibrated span in the 4 to 20 mA linear mode.
Rugged & Dependable: Ambient temperature effects to -29 to +82C (-20 to +180F) of normal operating conditions.
Best in the industry - 5 year warranty