Cheap 2inch Water Flow Meter Sewage water domestic wastewater Magnetic Flowmeter electronic magnetic flow meter
Cheap 2inch Water Flow Meter Sewage water
domestic wastewater Magnetic Flowmeter
Product details:
Product Technical Parameter
| Product Name | Cheap 2inch Water Flow Meter Sewage water domestic wastewater Magnetic Flowmeter | Nominal diameter | DN10-DN2000 |
| Medium conductivity | ≥5us/cm | Accuracy | 0.1%,0.5% |
| Flow rate rang | 0.5-10m/s | Communication | RS485(Modbus),HART |
| Medium temperature | ≤100℃ | Load Resistance | 4-20mA is 0-750Ω |
| Ambient temperature |
Sensor:-40℃-+80℃ Converter:-15℃-+50℃ |
Lining material | PTFE,F46,Hard rubber,PFA |
| Pressure Level |
PN1.6MPa or customized |
Electrode material | 316L,Hastelloy B, Hastelloy C,Ti |
| Shell material |
stainless steel, carbon steel |
Installation form | Compact type ,Remoted type |
| Output signal |
4-20Ma,Pluse |
Power consumption | ≤15W |
| Power supply |
220V,24V,Battery |
Protection level | IP65,IP68(need customized) |
| Explosion-proof grade |
Ex II BT6 Gb |
Electrical interface | M20X1.5 |
| Display |
Instantaneous flow, flow rate, percentage, air-to-tube ratio, positive, reverse accumulation, alarm display |
||
How to select lining
| Lining material | The main performance | The scope of application |
| PTFE | 1.1.The most stable chemical properties of plastics in a material that is resistant to boiling hydrochloric acid,sulfuric acid and aqua regia,but also resistant to concentrated acids and various organic solvents, intolerance chlorine trifluoride, liquid oxygen, high velocity liquid oxygen, ozone corrosion.2.Poor wear resistance | Concentrated acid,alkali and other corrosive media |
| PFA | Corrosion resistance with PTEF,strong anti-negative pressure | Can be used for negative pressure state |
| F46 | 1.Corrosion resistance with PTEF.2Can withstand low wear and tear.3,Strong anti-negative pressure. | With PTFE 2.Can be used for low abrasive media |
| Neoprene | 1.Have excellent flexibility,a high degree of tensile force,good wear resistance.2.Resistant to the general low concentrated acid, alkali,salt medium corrosion, corrosion resistant to oxidizing media. | Water, sewage, weakly abrasive mud, pulp |
| Polyurethane | 1.Has excellent wear resistance (equivalent to 10 times the natural rubber).2 acid, alkali performance is poor.3Do not use water mixed with organic solvents. | Strong neutral wear pulp, coal slurry, mud and so on |
Flow Range
| Diameter(mm) | Flow Range(m3/h) | Diameter(mm) | Flow Range(m3/h) |
| 15 | 0.0064-9.5426 | 65 | 0.1195-179.1886 |
| 20 | 0.0113-16.9646 | 80 | 0.1810-271.4336 |
| 25 | 0.0177-26.5072 | 100 | 0.2827-424.1150 |
| 40 | 0.0452-67.8584 | 150 | 0.6362-954.2588 |
| 50 | 0.0707-106.0288 | 200 | 1.1310-1696.4600 |
Features:
1.There is no movable part in the pipes ,hence ,nothing resista the flow and to cause pressure loss or jamming.
2.Measurement is free from series of influences e.g medium density,elasticity ,temperature or electrical conductivity.
3. Corrosion resistance and wearability standard among other indexes are met via selecting different materials for lining and electrodes
4 .The products are equipped with high resoluction backlighted LCD display, which is integrated with menus with both language of english and chinese, it is up to the users' needs to modify the measuring range on site.
5.The devices have also been integrated with series of communiction prorocals i.e.RS485. RS232 ,HART and MODBUS.
6.With programmable low frequency rectangular wave excitation,flow stability is promoted on less power loss.
7. Both power off protection and overrang alarming orients for measured calue,besides,it is also possible to change medium flow direction via programming the integrated sensor,which means installation of sensors are not limited to flow direction and messuring is operatable with both the flow directions.
1.Packing :The flow meter is packed in a shockproof bag and placed in a wooden box In order to ensure the safety of cargo transportation.
2.Delievery:Transportation supports sea, air, railway.Logistics.
3.Payment:T/T,Western Union, Credit card,E-checking,letter of credit ,Cash.
Electromagnetic flowmeter is used to measure the volumetric flow of conductive liquid and slurry in closed pipelines. It is suitable for chemical, electric power, metallurgy, petroleum, water supply and drainage, papermaking, medicine, food and other departments.
Production and warehouse
1.Q:How to install the electromagnetic flowmeter ?
A:We could provide manual of electromagneitc flowmeter ,kindly contacts us freely.
2.Q:How can i choose thie flow diameter ?
A:Yes.that according to your pipe inner diameter and flow range .we have profession guide you to choose suitable flowmeter.
3.Q:Can i get sample?
A:YES,we have materials in stock to help you to get the samples as soon as possible.
4. Q:Could you provide me the shortest lead time ?
A:We have materials in our stock ,if you really need ,you can tell us and we will try our best to satisfy you .
5.Q:Can i visit your factory ?
A:Of course,if you need we will help you to visit our factory.
6.Q:If i have paid,when will you help me to produce?
A:When we have received the money in our account ,we will give you the receipt and arrange to produce immediately.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier