MODEL | W-10KM | |
PHASE | Single phase with ground | |
CAPACITY | 10000 VA / 9000 W | |
INPUT | ||
Nominal Voltage | 208/220/230/240VAC | |
Input Voltage Range | 110-300 VAC (Based on load at 50%) 85-140VAC or 160-280VAC (Based on load at 100%) |
|
Frequency Range | 46~54 Hz or 56~64 Hz | |
Power Factor | 0.99 @ Nominall Voltage (100% load) | |
OUTPUT | ||
Output Voltage | 208/220/230/240VAC | |
Voltage Regulation | ± 1 % | |
Frequency Range (Synchronized ) | 46~54 Hz or 56~64 Hz | |
Frequency Range (Batt. Mode) | 50 Hz or 60Hz ± 0.1 Hz | |
Current Crest Ratio | 3:1 | |
Harmonic Distortion | equal or less than 3 % THD (Linear Load) equal or less than 6 % THD (Non-linear Load) |
|
Transfer Time | ||
AC Mode to Battery Mode | Zero | |
Inverter to Bypass | Zero | |
Waveform (Batt. Mode) | Pure Sinewave | |
EFFICIENCY | ||
AC Mode | 93% | |
Battery Mode | 91% | |
BATTERY | ||
Battery Type | 12 V / 9 Ah | |
Numbers | 16 | 20 |
Typical Recharge Time | 9 hours recover to 90% capacity | |
Standard Model | ||
Charging Current (max.) | 1A/2A (Adjustable) | |
Charging Voltage | 218.4VDC ±1% | 273VDC ±1% |
INDICATORS | ||
LCD | Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators | |
ALARM | ||
Battery Mode | Sounding every 4 seconds | |
Low Battery | Sounding every second | |
Overload | Sounding twice every second | |
Fault | Continuously sounding | |
PHYSICAL | ||
ENVIRONMENT | ||
Humidity | 0-95% RH @ 0-40°C (non-condensing) | |
Noise Level | Less than 58dB @ 1 Meter | |
MANAGEMENT | ||
Smart RS-232 | Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC | |
Optional SNMP | Power management from SNMP manager and web browser | |
PHYSICAL For Standard Model | ||
Dimension, D x W x H (mm) | 442 x 190 x 688 | |
Net Weight (kgs) | 66 | 76 |