Carborundum stair nosing indoor metal anti-slip strip for stairs

Q: Do you have your own factory?

--Yes, we are Manufacturer. The address of the factory is No.50, Dingjie,Pancheng, Pukou distric, Nanjing, Jiangsu, China. Welcome to visit us!

Q: What kind of services do you offer?

 --Our factory offers OEM with customers’ blueprint and the mould fee is negotiable considering the mount demands.

Q: How do I trim my stair treads to fit the stairs ?

-- Stair treads should be individually trimmed to fit each step, both in depth and from side to side. The rear cut should be made with a slight under bevel for a better fit. The stair treads can be marked with an awl and cut with a steel straight edge and a linoleum knife.

Caution: do not apply a lot of force while cutting and be sure to keep all body parts clear of the knife, should it slip.

Q:How do I prepare my steps for stair tread installation?

-- The surfaces of steps must be flat, clean, dry and free from oil, grease, rust, paint, varnish and old coverings, adhesives and any other foreign substance. Wooden steps should be thoroughly nailed or screwed down to avoid movement and defection. Worn or dished-out steps, cracks, holes, depressions or any irregularities on the step should be replaced or repaired by filling, sealing and smoothing with an appropriate leveling compound that will not crack or breakdown under normal use.

Q: Color is very important to me, are stair tread samples available?

--Yes, we undersrtand how important color selection can be. We will provide stair tread samples upon request, free of charge. and pls noted that the buyer need to takes responsibility of the express charge. And it need about 3-4 working days to prepare the samples.