Bi-color Sight glass level gauges
Transparent Flat Glass Level Gauge
Reflex Flat Glass Level Gauge
Defrost type
Weld Pad Flat Glass Level Gauge
Visual level indicator tube bypass
Transparent Tubular Level Gauge
Material:
· Carbon steel
· 1Cr18Ti9Ti
· Stainless steel
· Other material negotiable
Choices:
1. high temperature
2. high pressure
3. defrost level Gauge
4. reflex Level Indicator
5. transparent
6. boiler flat type
7. single color or bi-color;
8. sight glass
9. Illuminator
General introduction
TBS glass plate liquid level gauges are level measuring instrument. Upper and lower needle switches and indicating equipments are their main components. Fluid flows via switch into th indicating equipment, then the liquid level will display clearly viewed through the range of effective light transmission. And on that basis, we have developed double color glass sheet liquid level gauges, defrost glass sheet liquid level gauges and steam thermal glass sheet liquid level meters to adapt to different places and different conditions.
About sight glass plates’s glass quality, only borosilicate glass is used. The connection to the process is generally made with valve heads with single or double isolation. Drain valves enable the sight glass indicator to be emptied and are fitted to the lower flange face. If necessary, a vent valve can be fitted at the top.
1, TBS-A type transparent liquid level gauges
1) Measure range: 500~1700mm
2) Working temperature: ≤250
3) Working pressure: ≤4MPa
4) Meter material: qualitative carbon steel or 1Cr18Ni9Ti
5) Transmit color: nature color
2, TBS-B type double color glass sheet liquid level gauges
1) Measure range: 330~440mm
2) Working temperature: ≤250
3) Working pressure: ≤4MPa
4) Meter material: qualitative
Carbon steel or 1Cr18Ni9Ti
5) Transmit color: nature color
3, TBS-C type defrost glass sheet liquid level gauges
1) Measure ranges: 300~2000mm
2) Work temperature: -40~60
3) Working pressure: ≤4MPa
4) Needle switch close
Automatically pressure: ≥0.2MPa
5) Defrost pin height: 100mm, 150mm, 200mm, the lower the temperature the higher the pin.
6) Flange material: qualitative carbon steel or 1Cr18Ni9Ti
4, TBS-F type reflective glass sheet liquid level gauges
1) Measure ranges: 300~2000mm
2) Work temperature: 0~250
3) Working pressure: ≤4MPa
4) Needle switch close automatically pressure: ≥0.2MPa
5) steam insulating sheath pressure: ≤0.6MPa
6) flange material: qualitative carbon steel or 1Cr18Ni9Ti
5,TBS-S type windows glass sheet liquid level gauge
1) Light transmission size: 18×304mm
2) Working pressure: ≤1.0Mpa
3) Working temperature: ≤250
4) Jointing size: 80×366mm
5) meter face material: qualitative carbon steel or 1Cr18Ni9Ti
Easy to install, no extra piping required in most applications
Magnetic level gauge Visual level indication up to 30m, sections made suit for delivery. Magnetostrictive level indicator can reach 30m measure range with cable insertion.
Ideal for high-temperature, high-pressure and corrosive applications.
Magnetostrictive and radar transmitter options for non-invasive and/or redundant level control.
Available with HART, 4~20mA, and level switches.
Float Cage Material | SS304, SS316, PTFE, PP, PVC, PVDF |
Max. Centre to Centre Distance | 6000 mm, greater lengths on request |
Connecting Flanges | According to DIN or ANSI B16.5 |
Temperature of Liquid | 450ºC (Max.) for SS, 80ºC (Max.) for PVDF 60ºC (Max.) for PVC, 50ºC (Max.) for PP |
Specific Gravity | Min. 0.45 |
Scale | Graduated in cm, Aluminium or SS304 |
Measuring Accuracy | +/- 5 mm |
U-ideal mounting styles
Typical pictures of magnetic level indicators
Model Selection Table
Basic selection of magnetic level indicator please refer to the following steps:
UHC- | C | Side mounted; | |||||||||
D | Top mounted | ||||||||||
O | Other | ||||||||||
Signal | Y | Standard transmitter 4~20mA current signal (Resolution: 20mm/10mm/5mm); | |||||||||
Y3 | Magneticostrictive transmitter 4~20mA | ||||||||||
H | Hart; | ||||||||||
A | Switch and number; | ||||||||||
L | transmitter with LCD | ||||||||||
No signal output | |||||||||||
Indicator type | O | Ordinary pannel | |||||||||
S | Sealed bargraph | ||||||||||
L | Red/Green flaps with LED lamp | ||||||||||
Structure | S | Steam tracing | |||||||||
E | Electric heating | ||||||||||
F | Defrost | ||||||||||
Valve | D | Drain valve or drain plug | |||||||||
DV | Drain valve and Vent valve or plug | ||||||||||
N | No valve | ||||||||||
Working temperature | A | Ambient temperature (0~40ºC) | |||||||||
M | -20~200ºC | ||||||||||
H | High temperature (<400ºC) | ||||||||||
L | If easy frozen | ||||||||||
Material | SS304 | 0Cr18Ni9 | |||||||||
SS316L | 022Cr17Ni12Mo2 | ||||||||||
SS321 | 0Cr18Ni10Ti | ||||||||||
PP | PP (Polypropylene),PVC,PVDF | ||||||||||
PTFE | stainless steel lined with PTFE | ||||||||||
Explosion-proof | S | Safety environment | |||||||||
E | Explostion-proof ExdII BT4 | ||||||||||
I | intrinsic safety ExibII CT4 | ||||||||||
Measure range | Unit: mm | ||||||||||
Fluid density | g/cm3 | ||||||||||
working pressure | Unit: MPa | ||||||||||
Flange size, rate and standard | ANSI | DIN | JIS | ||||||||
Example: UHC-C-YA-O-D-M-SS304-S-500-0.8-1-DIN DN25 PN16 |
Remark: Manufactured customized is available for this product.
Can be made to Sections if gauge is longer than 3m to make suitable for delivery.
Special working conditions magnetic level gauge
UHC - V side-top mounted high viscous liquid Float level gauge
UHC - V side-top mounted high viscous liquid type Float level gauge is suitable for the petrochemical tank liquid level measurement system, and especially suitable for heavy oil, tar, crude oil, resin of high viscosity medium liquid level detection.
Features:
C-C: 500 ~ 10000 mm, long gauge can be section made.
Process connection: size DN6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc).
Lead tube material: 304SS; 316SS; 316L
Float material: 304SS; 316L, Titanium
Working pressure: 0 ~ 1.6 MPa
Working temperature: - 20 ~ 200 ºC
Accuracy: + / - 10 mm
Medium density: 0.65 ~ 2.0 g/cm3
Medium viscosity: 1.5 Pa s. or less
Model Selection:
UHC-V | Top-side mounted high viscosity fluid type float level gauge | ||||||||||||
L | drain valve | valve | |||||||||||
B | SS304 or stainless steel 1Cr18Ni9Ti | wet material | |||||||||||
L | 316SS or 316L | ||||||||||||
150 | DN150 or 6" | Connection | |||||||||||
200 | DN200 or 8" | ||||||||||||
A | Flange nominal pressure 1.0MPa | PN | |||||||||||
B | Flange nominal pressure 1.6MPa | ||||||||||||
1 | -20~80ºC | Working temperature | |||||||||||
2 | -20~130ºC | ||||||||||||
3 | -20~200ºC | ||||||||||||
B | cam magnetic drive switch | switches | |||||||||||
C | reed switch | ||||||||||||
number of switches | |||||||||||||
R1 | standard transmitter 4~20mA | transmitter | |||||||||||
R2 | magnetostrictive transmitter 4~20mA | ||||||||||||
R3 | magnetostrictive transmitter 4~20mA, with Hart | ||||||||||||
O | standard | ex-proof | |||||||||||
D | flame-proof ExdIIBT4 | ||||||||||||
E | intrinsic safety ExibIICT4 | ||||||||||||
height of install | |||||||||||||
width of install | |||||||||||||
measure range | |||||||||||||
fluid density | |||||||||||||
working pressure |
Top mounted vaporizing fluid float level gauge
UHC -T Top mounted vaporizing fluid special using magnetic float level gauge is suitable for liquid measurement which is easy vaporization in pressure vessels, especially for buried tank of liquid level measurement such as liquefied petroleum gas, methane. This model level gauge adopts of a set of three pure titanium floats and unique guide rail structure, with stable and reliable product performance, strong practicability, now is widely used in LPG stations.
Features:
Measuring range: 300 ~ 3000 mm.
The process connection: flange size is 6 ~ DN200, flange standards (GB, JB/T, HGJ, ANSI, DIN, etc) please declare when ordering.
Lead tube material: stainless steel 1Cr18Ni9Ti; 304SS; 316SS; 316L
Float material: Titanium
Working pressure: -0.1 ~ 4 MPa
Working temperature: - 80 ~ 80 ºC
Accuracy: + / - 10 mm
Medium density: 0.4 ~1.2 g/cm3
Medium viscosity: 0.4 Pa s.
Model Selection:
UHC-T | Top mounted vaporizing fluid special using float level gauge | ||||||||||
B | SS304 or stainless steel 1Cr18Ni9Ti | wet material | |||||||||
L | 316SS or 316L | ||||||||||
150 | DN150 or 6" | process connection | |||||||||
200 | DN200 or 8" | ||||||||||
A | Flange nominal pressure 1.0MPa | nominal pressure | |||||||||
B | Flange nominal pressure 1.6MPa | ||||||||||
1 | -20~80ºC | Working temperature | |||||||||
5 | -80~80ºC | ||||||||||
B | cam magnetic drive switch | switches | |||||||||
C | reed switch | ||||||||||
number of switches | |||||||||||
R1 | standard transmitter 4~20mA | transmitter | |||||||||
R2 | magnetostrictive transmitter 4~20mA | ||||||||||
R3 | magnetostrictive transmitter 4~20mA, with Hart | ||||||||||
O | standard | ex-proof | |||||||||
D | flame-proof ExdIIBT4 | ||||||||||
E | intrinsic safety ExibIICT4 | ||||||||||
J3 | Vacuum jacketed | ||||||||||
height of install | |||||||||||
measure range | |||||||||||
fluid density | |||||||||||
working pressure |