Carbon fiber industry flow meter wireless liquid flow meter acrylic
Carbon fiber industry flow meter wireless liquid flow meter acrylic
Characteristics of electromagnetic flowmeter:
| Advantages | Unaffected by the temperature, pressure, density or viscosity of the liquid |
| Capable of detecting liquids containing contaminants (solids, air bubbles) | |
| No pressure loss | |
| No moving parts (improve reliability) | |
| Disadvantages | Unable to detect non-conductive gas and liquid |
| Need a short straight pipe |
Carbon fiber industry flow meter wireless liquid flow meter acrylic
Features:
1. There is no movable parts in the electromagnetic flowmeter, no loss pressure , simple structure, woke reliable;
2. The measurement accuracy is not affected by the change of the measured medium’s pressure, density (including liquid-solid two-phase),temperature, viscosity and other physical parameter;
3. Moisture proof and waterproof performance is good. Suit for setting up and being used underground or wet environments;
4. Compare with other flowmeter, its advantage : big measurement range , low demand in straight pipe, high accuracy;
5. Low power consumption, one set flowmeter power consumption less than 20W.
The main technical indicators:
| Nominal diameter: | DN15~DN2000 |
| Accuracy: | ±0.2%,±0.3%,±0.5% |
| Measurement range (flow rate): | 0.01m/s~15m/s |
| Conductivity of medium: | more than 5μS/cm |
| Nominal pressure: | 0.6MPa,1.0MPa,4.0MPa |
| Protection grade: | IP65,IP67,IP68 |
| Electrode material: | Stainless steel 316L,Hastelloy B, Hastelloy C, Titanium alloy, Tantalum alloy, Platinum-iridium alloy, Stainless steel-coated tungsten carbide and other special material. |
| Lining material: | Neoprene,Polyurethane rubber,natural rubber, nitrile rubber, Teflon(PFA),Polytetrafluoroethylene(PTFE), fluorinated ethylene propylene (FEP OR F46), ceramics. |
| Connection: | Flange connection[GB/T9119-2010 standard] |
| Ambient temperature: | -10℃~50℃ |
| Power supply: | AC220V/DC24V/DC3.6V |
| Signal output: | Analog 4mA-20mA, 0Hz~ 5 KHz frequency, two alarm outputs: high limit alarm and low limit alarm |
| Communication: | RS485,RS232,MODBUS,HART,PROFIBUS-DP ( OPTIONAL) |
Working principle
Electromagnetic flow meters are flowmeters that measure flow according to Faraday's law of electromagnetic induction. Electromagnetic flowmeters have the advantage of minimal pressure loss and a large range of measurable flow rates. The ratio of the maximum flow rate to the minimum flow rate is generally more than 20:1. The applicable industrial tube diameter is wide, up to 3 meters. The output signal and the measured flow rate are linear, and the accuracy is high. The conductivity can be measured ≥5μs/cm. Acid, alkali, salt solution, water, sewage, corrosive liquids, and fluid flow of mud, pulp, pulp, etc. However, it cannot measure the flow of gas, steam, and pure water.
Carbon fiber industry flow meter wireless liquid flow meter acrylic
Order notice:
1. The measured medium should not contain more ferromagnetic substances and a lot of bubbles, otherwise it will affect the measurement accuracy;
2. The user shall clearly specify to our company the medium to be measured and its flow range, working pressure and fluid temperature, and select the appropriate flow meter according to these parameters;
3. If the user needs to install accessories, such as supporting flanges, gaskets, bolts, nuts, washers and other additional requirements, can ask when ordering.
Carbon fiber industry flow meter wireless liquid flow meter acrylic
Carbon fiber industry flow meter wireless liquid flow meter acrylic
About Shengda Water Meter
1.2 factories-+200 workers, +100 products 2.400 customers
3.23 years production experience 4.+50000 square meters' area
5.Our stainless steel equipments are from DN6mm~DN3000mm,
6.Our customer service staff is from multilanguage talented persons, more intimately serve oversea's clients
7.Our brand "Shengda water meter & China instrument"
WE ARE THE ENTERPRISE IN CHINA INTEGTATED WITH WATER METER AND FLOW METER
We have cooperated with many famous companies in the world, if you give us a chance to serve you, we trust we'll be your supplier in China.
WELCOME TO CONTACT US!
Every visiting customer has a very good evaluation of our factory's strength and products. After understanding our corporate culture and services, they have a deeper trust in our factory and expressed long-term cooperation between us.
FAQ: Carbon fiber industry flow meter wireless liquid flow meter acrylic
1.Are you a trade company or a manufacturer?
Kaifeng Shengda Meter Co., Ltd has been a professional manufacturer for over 20 years to undertake design and processing of all types of flow meter to provide production service and technical support for customers.
2.What to do if I have any other specifications for the current?
If you have any different requirements,just contact us and we will meet you.
3.If I need a sample for pretest, do you sale sample for this inquiry?
Yes, we can sale sample for pretest. If you need this service, please contact us and we will give you a quotation.
4.Can you produce the products according to my own drawings?
Yes, we can do OEM according to your requirement.
Please contact us for the WHOLE CATALOGUE, our technical engineers are waiting for solving your problems now!! Action now!!
 |
Tel: +86 371 23366506 |
| Mob.: +86 18637817105 / 15237828699 | |
| Facebook: 18603780816 | |
| Email: admin(@)kfzhyb.com |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier