Car silicon oil seal silicone rubber price fashionable food grade
Customized rubber oil seal
We are a manufacturer mainly specialize in producing different types of O-rings,rubber oil seal,customized rubber products.The materials are available in NBR,SILICONE,FKM,EPDM,HNBR and so on.
We have thousands of available oil seals and O-ring moulds in stock and sample is free from our stock. We can also open new moulds as customers' drawings or physical sample for standard or non-standard o rings and other rubber parts.
| Material | NBR ,SILICONE,EPDM,FKM,HNBR,etc |
| Color | Black, Transparent, White, red, green, as customers' requirement |
| Size | customers requirements |
| Hardness | 30-90 shore according to work environment |
| Service | OEM or ODM |
| Production basis | Samples or drawings |
| Technology | compression, injection or extrusion |
| Working temperature | -60-350 Celsius degree |
| Tolerance | ±0.05mm |
| Density | 1.0-2.0g/cm² |
| MOQ | 100 pcs rubber oil seal |
| Working life | 10-30years |
| Sample | Sample is free from stock |
| Application | Mechanical equipment. Automotive ,Construction,Home appliance,Aviaiton,Office facilities and so on |
| performance | 1.Good sealing and damping 2.Water resistance 3. Anti-aging 4.Anti- ozone 5.oil resistant 6.pressure resistant |
| Common types of oil seals | |||||
| Type | Code number | Main features | Usage | Dielectric pressure resistance | Maximum line speed |
| Simple single lipped | B | It is commonly used for high and low speed rotating shafts and reciprocating movement to seal mineral, oil and water. | Ordinary oil seal, in the case of less dust and impurities, the use of medium pressure, the reciprocating speed of <0.1m/s. | <0.05MPa | 15m/s |
| Regular lip | FB | In addition to the characteristics of the above S type oil seal, dust can be prevented. | Ordinary oil seal, with dustproof lips, dustproof, resistant to medium pressure | <0.05MPa | 15m/s |
| No spring type | BV | Spring free single lip type inner frame type rubber oil seal. | Generally applicable to low-speed conditions, the sealing medium for the lubrication of ester. | <0.05MPa | 6m/s |
| Outer skeleton, single lip | W | With the spring single lip exposed skeleton rubber oil seal, waist thin, follow good, good rigidity. | Ordinary oil seal, used in case of less dust and impurities | <0.05MPa | 15m/s |
| Outer skeleton, double lips | FW | With the lips of the lips exposed, skeleton rubberoil seal, waist thin, followed by good, high stiffness, good coaxial. | Ordinary oil seal, with dustproof lips, dustproof, resistant to medium pressure <0.05 | <0.05MPa | 15m/s |
| Fabricated single lipped | Z | From the inside and outside the outer skeletonoil seal skeleton assembly into piping and installation of high , fast heat dissipation, heavy load characteristics. | Suitable for heavy load under high temperature and high speed condition | <0.05MPa | 15m/s |
| Fabricated double lipped | FZ | The assembled external skeleton oil seal with side lip has the characteristics of dust resistance, high installation accuracy, fast heat dissipation and heavy load characteristics. | Apply to high temperature, high speed, heavy load under dust condition | ≤0.05MPa | 15m/s |
| Unidirectional reflux type | Dextral SR,Levo DL | A diagonal bar with angle in lip air measurement system using fluid mechanics principle, produces pump function, with reflux effect. | Because of the backflow effect, the radial force is smaller than that of the ordinary oil seal, thereby reducing wear and heat build-up and improving service life | <0.05MPa | 20m/s |
| Pressure type | NY | The lip is short, stubby waist, with pressure, work pressure is less than 3MPa. | The shaft end oil seal for high pressure pump, general PV value is less than or equal to 8 | ≤3MPa | 15m/s |
Q 1.Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
A2: We have various rubber compounds approved by UL, ,, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q 4: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 5: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 6:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order. 
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier