Car modification universal gear head racing roller stick head 130MM unlimited long gear bar Personality gear bar
Material: aluminum
Type: shift knob
Color: purple
Accessories: 1 rubber mounting adapter (8mm, 10mm, 12mm)
Applicable models: General
Installation instructions: 1, remove the original car block
2. Remove the aluminum alloy sleeve at the bottom of the gear shifting head.
3, take the rubber sleeve suitable for the size of the shift lever
4. Turn the rubber sleeve into the gear lever
5. Put the gear shifter directly into the gearshift lever (note: first put the rubber cover on the gearshift lever)
6, put the small screws up
7, the hexagonal screw is tightened
8. Tighten the aluminum cover upwards.
[Warm reminder]: This gear shift head is suitable for most automatic/manual gear models. The original car gear head dust cover cannot be completely put on after installation. This shifting head belongs to the modified parts. The design of the dustproof sleeve of each shifting head is different. The modified shifting head cannot be matched with the design of the dustproof sleeve of all models, unless it is the original original shifting head for the special car. . Therefore, it is normal for the dust jacket to be too long or too short after installation, regardless of any purchase of any modified shifting head. Customers who cannot accept similar problems, please be careful!
Manual gear: reverse gear can not be used
Automatic: the shift headband button cannot be used