Wheels with two conditions should be purchased with care:
First, your hub is sprayed with a matt paint, which can result in poor adhesion.
Second, the edge of the hub is heavily worn, which also reduces the adhesion.
In the above two cases, the shop can not guarantee the safety of your use, and it is your responsibility.
Until now, only these two conditions have been found to affect adhesion.
Without these two conditions, you can buy with confidence and ensure that the bond is strong.
Please strictly follow our construction process during installation (adhesion promoter must be used)
Installation method It is recommended to operate when the weather is warm and the temperature is high.
First, clean the edge of the wheel hub. Clean the place to be attached to ensure that the surface is free from dust, water, and oil. Use an alcohol cotton cleaning kit to clean it.
Second, apply 3M adhesion promoter to the part where the hub needs to be applied. After coating, dry it for 3-5 minutes.
Three, Uncover the double-sided tape and stick it to the place to be glued. Firmly press on the double-sided adhesive with your fingers to make sure that the adhesive is tighter
Do not flush with high pressure water gun and drive too hard within 24 hours
Inquiry and consultiing support
Sample testing support
View our factory
If you have any questions, when you are using the process,please feel free to contact us
Once you receive your question, we will reply in time