Description:
1. for Power Prog & ECOOBD2 is a brand new Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.
2. When it plugged into OBD2 connector, for power prog receives the information from the car computer for ECU. With the received data from for ECU, for power prog adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
3. for Power Prog & ECOOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
4. for Power Prog & ECOOBD2 finds out the hidden power of your car. for Power Prog does not damage the engine and the car computer for ECU or not cause any negative effects to the car factory setting.
5. for Power Prog & ECOOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug for Power Prog or ECOOB2 from OBD2 connector.
Functions:
1. It works based OBD2 protocols as remaping the Car's computer for ECU.
2. After driving 200 km road total, for Power Prog adjusts itself to the car, according to the drivers' habits and always keeps remaping the for ECU to increase the performance of engine.
3. According to your driving habits, for Power Prog makes new map in the car's computer for ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.
Features:
1. for Power Prog & ECOOB2 Chip Tuning Box works on the basis of changing the signal form for ECU. As a consequence, it changes the whole injection map.
2. The main difference between for Power Prog Chip Tuning Box and Remapping tuning methods is that for Power Prog Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.
3. for Power Prog & ECOOB2 is equipped with the engine protection function and 100% safe for your car engine. for Power Prog produced on the printed circuit board in for SMD technology. for Power Prog & ECOOB2 Chip Tuning Boxes are high quality.
Installation and Calibration:
1. Pull the Car Key out from the ignition.
2. Find OBD2 connector(*) in your car and Plug in for Power Prog Chip Tuning Box
3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4. Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (for Power Prog Chip Tuning Box will communicate and establish connection with for ECU)
5. Start up the engine.
6. for Power Prog & ECOOB2 Chip Tuning Box will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus for Power Prog & ECOOB2 Performance Chip Tuning Box will adjust itself to match your car perfectly for more fuel saving.