Product introduction
The magnetic mixer, a fully closed, non-leakage, non pollution mixing, is installed at the bottom of tank. Because the sanitary magnetic agitator is a non-contact transmission torque with no transmission shaft, it is made by magnetic drive. The dynamic seal was replaced by the static seal, which solved the problem that the other shaft seal could not overcome the leakage. The whole material and the stirring parts were operated in a sterile and sanitary state. It is pharmaceutical, fine chemicals, cosmetics, bioengineering and other industries ideal replacement products.
Application scope: mixing device for all kinds of reactors, mixing tank and storage tank
Working condition: inflammable, explosive, easy to leakage, high requirement on sealing
Technical parameter: working temperature:-20~220℃
Material: 316L or 304
Working pressure: -0.1~0.6Mpa
Model selection description: should know the change of viscosity and density, working temperature and working pressure
Working characteristics
Sanitary magnetic mixers are designed for GMP modification in pharmaceutical, bioengineering and food industries.
Good performance, reasonable structure, small volume and reliable use.
The mixer is composed of inner magnetic steel, external magnetic steel, isolation sleeve and driving motor.
It is applied to mixing device of stainless steel reactors and mixing tanks.
All the contact materials of the magnetic agitator are made of 316l/304. The working principle of permanent magnetic coupling is used to drive the operation of stirring shaft. The dynamic mechanical seal is replaced with static mechanical seal, which solves the unavoidable problem of mechanical seal. The magnetic agitator produces a whirlpool by rotating, sucking dissolved powder or liquid into the swirl and being quickly sucked into the stirring impeller.
When the suction direction of the impeller rotates with the impeller, the centrifugal force impinges different media into the tank wall in the form of radiation from the outer diameter of the impeller.
After hitting the tank wall, the liquid is sucked back to the suction end of the impeller with impact force and rising cycle.
The constant moving agitation under the impeller thrust results in homogenization, mixing, dissolution and dispersion.
Technical Data
Material | Contact with the product parts | 316L |
Non contact product parts | 304 | |
Viscosity | Max viscosity CP | 300CP |
Pressure | Design pressure | -1~6bar |
Temperature | Working temperature | -20~220℃ |
Surface treatment | Internal surface finish | Ra0.4~0.6μm |
Connection | Weld | |
Installation | Horizontal/vertical | |
Volume | 30L-30000L | |
Motor- decelerator | 0.37-18kw/110V-480V |
The product selection
Model selection description: should know the change of viscosity and density, working temperature and working pressure
For more information or any question, please feel freely to contact with us here!
Magnetic Stirrer Advantages
With a bottom agitator to ensure that very low level materials are also fully agitated. No mechanical seal, no risk of cross-contamination and leakage of lubricant, no baffle. Fast online cleaning and sterilization, easy to verify and easy to maintain.
Bottom magnetic mixer
* The above information is for reference only and can be customized according to customer requirements.
For more information or any question, please feel freely to contact with us here!
Q: What is the delivery time?
A: We have strong stock of standard products, generally delivery time within 10-30days.
Q: How long is the guarantee?
A: We promise guarantee as one year for non-human damage factor.
Q: What is the MOQ?
A: 1 set
Q: Can you do OEM & ODM?
A: Yes
Q: Where is your nearest port?
A: Ningbo/Shanghai Port
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Wenzhou City, China.You can fly to Wenzhou Yongqiang airport directly.
Q:Why do you choose us?
We have wide range stock of stainless steel products.
We have experienced technical people, labor worksers. High effective sales team. Some of us had been in this industry for more than 17 years.
Mass production capacity ensure on time deivery.
One year warranty; perfect after-sales service for spare parts
Best prices with good quality and reliable performance
Easy maintenance.
Our logo or OEM
About company
Wenzhou chengyi machinery co., ltd. is a company integrating design, production, sales and service. The main products are sanitary diaphragm valves, sanitary ball valves, butterfly valves, sampling valves, angle seat valves, check valves, safety valves, filters, strainers, centrifugal pumps, negative pumps, self-priming pumps, fittings, elblows, tees, cross, reducers, clamps, unions, cleaning ball, sight glass, manholes, pipings, bottom magnetic mixers, emulsifer, and stainless steel tanks. Comply with GMP, QS, HACCP requirements. Chengyi machinery technology team has more than 10 years of mechanical manufacturing experience and professional equipment knowledge, to provide customers with reasonable and effective solutions. Chengyi machinery professional technology, high quality products, meet the pharmaceutical, food, biological, daily chemical, chemical and other fields.
The company introduces professional production equipment and manufacturing technology, and the vessels are manufactured in accordance with GB, JB, ASME, CE standards. Pipe fittings in accordance with ISO, DIN, IDF, 3A and SMS industrial standards; All kinds of non-standard products are customized according to the requirements of customers. Our products meet international standards and are in the leading position in the industry. Products can be traced back to the manufacturing and time of each process to ensure the quality of products.
The company adheres to the "quality first, reputation first, service first" business purpose, adheres to the "honest, pragmatic, win-win" business philosophy, to provide clients with the best service, best product quality and perfect after-sales service to win the majority of customers rely on and support. Chengyi machinery is willing to work together with every new and old customer to create brilliant future!
YOUR RELIABLE PARTNER
For more information or any question, please feel freely to contact with us here!
1. The Quick reply: We will reply you right now in work time, if it is not in work time, we will reply no more than 12 hours.
2. The Strong package: Our package group is professional, steps: bubble-plastic bag-carton or plywood wooden case or metal frame.
3. The Best After-sales service: If the problems existing problem itself, we will responsible for it.
4. Long life services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.
How to place an order?
Step 1: please contact with salesman, tell him the URS (user requirements), including item name/size/material/standard. For example: manual diaphragm valve/ DN25, clamp end/ SS316L/ 3A.
Step 2: After you confirm the details with salesman, he will send you an offer accordingly.
Step 3: If you are agree with the price, you can tell the salesman you want to finalize the order.
Step 4:Our sales man will make an Order with you at the first time, then you can pay for it.
Step 5:Will arrange the products as soon as you pay for it and we will delievery you at the speedy way.