Model | CW6280B | ||||||
Max. swing diameter over bed | 800 mm | ||||||
Max. swing diameter over carriage | 480mm | ||||||
Max. workpiece length | 3000mm | ||||||
Max. swing diameter and width in gap | 1000/310mm | ||||||
Spindle bore and nose | 104,D11(B series) | ||||||
Taper in spindle nose and center | 120(B series) Morse NO.5 | ||||||
Steps and range of spindle speeds | 18speeds 5.4-720r/min | ||||||
Steps and range of longitudinal feeds | 64feeds 0.06-24.3mm/r | ||||||
Range 1:1 | 0.1-1.52mm/r | ||||||
Range 16:1 | 1.6-24.3mm/r | ||||||
Range of fine feed with change gears | 0.06-0.912mm/r | ||||||
Number, range of module thread | 53kinds 0.5-120mm | ||||||
Number, range of diametral thread | 24kinds 28-1DP | ||||||
Max. cross travel of lower slide | 500mm | ||||||
Max. travel of top slide | 200mm | ||||||
Max. travel of tailstock quill | 250mm | ||||||
Taper of tailstock quill | Morse NO.5 | ||||||
Width and hardness of bed guideways | 600 RC52mm | ||||||
Main motor power | 11 or 15kW | ||||||
Rapid motor power | 1.1kW | ||||||
Power of coolant pump motor | 120W | ||||||
Machine W×H/packing W×H | 1550×1630/1880×1910mm | ||||||
Machine length/Packing case length | Max. length of workpiece | 3000 | mm | 5250/5650 | |||
Weight of machine (net weight/gross weight) | Max. length of workpiece | 3000 | mm | 5500/6900 | |||
Max. weight of workpiece | 2500kg |