Item | Specifications | Units | CW6163E |
Machining range | Max.swing over bed | mm | 630 |
Max.swing over cross slide | mm | 350 | |
Max.turning length | mm | 1000-12000 | |
Bed width | mm | 550 | |
Spindle | Spindle nose code | C11(D11) | |
Diameter of the spindle | mm | 105 | |
Spindle inside taper | mm | Metric120 1:20 | |
Range of spindle speeds | r/min | 10-700 | |
Spindle speed series | four gears to change speed ,no grade to change frequency | ||
Feeding system | Longitudinal and transverse feeding number range | mm/r | 56;0.1-12 |
Screw pitch | 12 | ||
Number range of the thread under Metric system | mm | 44;1-120 | |
Number range of the thread under British system | mm | 26;14-1inch | |
Number range of the module thread | mm | 45;M0.5-M60 | |
Number range of the diametric thread | mm | 24 28-1 | |
Slide fast moving speed | mm/ min | 4000 | |
Knife rest | Max cross travel of turret | mm | 420 |
Max travel of compound slide | mm | 200 | |
Tool section size | mm | 32*32 | |
Tailstock | Sleeve diameter of tailstock | mm | 100 |
Sleeve trip of tailstock | mm | 250 | |
Cone hole taper tailstock sleeve | Morse | Morse 6 | |
Main motor power | kw | 11 | |
Size | L*W*H | mm | 4000*1320*1500 |
Weight | Net weight | kg | 4050(1500) |