item | UNIT | CW61125(10T) | CW61140(10T) | CW61160(10T) | |||
CAPACITIES | Swing over bed | mm | 1250 | 1400 | 1600 | ||
Swing over carriage | mm | 865 | 1010 | 1210 | |||
Max.length of workpiece | mm | 3000 4000 5000 6000 8000 10000 | |||||
12000 | |||||||
Max.turning length | mm | 2800 3800 4800 5800 7800 9800 | |||||
11800 | |||||||
Pan of guideway | mm | 970 | |||||
Max.cutting force | N | 45000 | |||||
Max.weight of workpiece | kg | 10000 | |||||
SPINDLE | Dia.of spindle hole | mm | 130 | ||||
Taper hole of spindle | Metric140 | ||||||
Range of spindle speeds | r/min | forward:3.15~315; reverse:3.5~291 | |||||
No.of spindle speeds | forward:21; reverse:12 | ||||||
FEED | Longitudinal and cross | 56 | |||||
Range of feed motion | mm | longitudinal:0.1~12;cross:0.05~6; | |||||
top siide:0.025~3 | |||||||
No. and range of metric thread | 44;1~120 | ||||||
No. and range of inch thread | 31;28~1/4 | ||||||
No. and range of module thread | 45;0.5~60 | ||||||
No. and range of dia. thread | 38;1/2~56DP | ||||||
TURRET | Max.travel of cross slide | mm | 650 | ||||
Max.travel of top slide | mm | 300 | |||||
Section of tool shank | mm | 45(260x260) | |||||
Tool post swing range | ° | ±90° | |||||
Rapid of tool post | mm/min | Longitudinal:3740;cross:1870; | |||||
top slide:935 | |||||||
Max.travel of tool post | mm | 2900 3900 4900 5900 7900 9900 11900 | |||||
TAILSTOCK | Dia. of tailstock | mm | 220 | ||||
Travel of tailstock quill | mm | 300 | |||||
Taper hole of tailstock quill | morse 6 | ||||||
OTHERS | Main motor power | kw | 22 | ||||
Length | mm | 6020 7020 8020 9020 11020 13020 | |||||
15020 | |||||||
Width | mm | 1995 | |||||
Height | mm | 2175 2325 2525 |