Application CU/XLPE/PVC/SWA/PVC cable 6mm 4 core armoured cable
0.6/1kV Copper armoured cable
is suitable for use in rated AC voltage (U0/U) 0.6/1kV 0.66KV
system transmitting and distributing circuit. With the metal armour layer, it is suitable for mains, submain and sub circuits unenclosed, in conduit, buried direct or in underground ducts for buildings
used in electric power plants, transformer stations, industrial plants, metropolitan networks and in other electric plants, same as for connection of signaling devices in industry, traffic and similar.
Insulation: CU/XLPE/PVC/SWA/PVC cable 6mm 4 core armoured cable
XLPE or PVC
Advantage Property for Use (XLPE insulation):
It is far better than all property targets of PVC insulated power cable and has overcome the shortcomings of physical and chemical crosslinkage, and completely reaches or surpasses GB and IEC technical property value.
The allowed max .cable conductor work temperature is 90℃;urgent excess work temperature is 130℃ for short circuit(5s), max. conductor temperature is 250℃. The environmental temperature for laying cable should be not less than 0℃. If laying under 0℃, the cable should be preheated.
The cable bend radius for single core should be not less than 12 times of overall cable diameter; for multi-core cable, not less than 10 times of overall cable diameter.
The current-carrying capacity is large and not limited by drop during laying .
Armour type:
Single core cable: Non magnetic wire ( aluminium wire or stainless steel wire )
Two cores, three cores, four cores, five cores: Steel wire or double steel tape
SWA ( steel wire armour cable ):
Steel Wire Armoured (SWA) BS5467
is a robust and hard-wearing power cable with copper conductors, XLPE insulation, steel wire
armour and a black PVC sheath. It is designed for the supply of mains electricity – for power
networks, underground systems, cable ducting and is suitable for both indoor and outdoor use.
With its steel wire armour, is particularly useful in external or underground projects. As well as providing effective mechanical protection, the armour enables it to withstand higher pulling loads. SWA’s XLPE (Cross-Linked Polyethylene)
insulation is resistant to a wide range of chemicals and has good thermal stability.
The versatile SWA BS5467 Cable is commonly used across a whole range of industries including building and construction, and rail and transport. The armoured mains cable is also supplied for transmission, distribution and power networks as well as automation and process control systems.
Core Identification:
1 Core: Brown or Blue
2 Cores: Brown, Blue
3 Cores: Brown, Black, Grey
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Alternative core identification: White Cores with Black numbers
*Other color identification could be customization.
Q1: Is your company a factory or trade company ?
A: We are factories, more than 20 years in China.
Q2: What's the quality assurance we can provide and how do we control quality?
A:100% inspection on assembly lines. All controls, inspections, equipment, fixtures, total production resources and skills are inspected to confirm they consistently achieve the required quality levels.
Q3: What's your payment terms?
A: We normally accept T/T 30% deposit, 70% balance before delivery as the main payment terms, and other payment can also be negotiated.
Trade assurance on Alibaba is also available.
Q4: What’s the delivery time?
A: Formal order needs 10-25 days.
Q5: Can I get some samples?
A: Yes, sample order is available for quality check and market test.
Q6: Do you have the products in stock?
A: Yes, we will keep some general ones in stock.
Q7; What is your MOQ?
A: It`s base on the cable type or wire type. We also accept Small order .
Q8; Where is your factory ?
A: we are in henan , middle of china .