Introduction:
CTS-2009 multi-channel TOFD ultrasonic detector is compatible with EU EN12668-1:2010 standard, domestic NB/T47013.10, DL/T330, GB/T 23902 standard, capable of scanning 200mm thick weld seam at one time, with reduction defect characteristics The functional synthetic aperture focusing (SAFT) technology uses an industrial-grade TFT display with full WVGA resolution (800×600). It is fully capable of working outdoors and in direct sunlight, supporting full touch operation and improving detection efficiency. The detector passes the test of China Special Equipment Inspection and Research Institute and obtains the B-level certificate. It achieves Class A performance index requirements in 14 TOFD detection key indicators such as equivalent input noise and net gain.
Features:
1. "3+4+1" multi-channel design: 3 TOFD channels can cover 200mm thickness weld inspection at one time, an ideal alternative to traditional ray inspection; 4 conventional channels can be used for the surface blind zone and bottom blind zone of the weld Cover detection, the probe lines of 3 TOFD channels and 4 PE channels are led out by the same cable; 1 single channel is used as single channel TOFD detection and conventional ultrasonic inspection.
2. Square wave excitation, ultra-fidelity low-noise preamplifier technology, the defect recognition is clearer; with the company's preamplifier CTS-8682, the signal-to-noise ratio is increased by about 10dB.
3. Unique channel-to-channel noise suppression technology to solve the crosstalk problem between multi-channels in domestic instruments.
4. Meet domestic TOFD standards NB/T47013.10, DL/T330, GB/T 23902, compatible with EN12668-1 standard.
5.8.4-inch industrial-grade TFT display (800×600), full touch operation, improve your detection efficiency.
6. Up to 400MHz A/D sampling frequency, high sampling depth.
7. The one-time TOFD scan length is up to 40m.
8. A scan, B scan, TOFD scan and other flaw detection functions.
9. Rich data interface, dual USB interface, LAN network interface, HDMI high-definition digital interface.
10. A variety of scanners are available, and a dedicated scanner is customized for the user. The standard scanner is SCQtofd-3.
11. The special aviation grade custom data cable is adopted, which has small signal transmission loss and excellent flexibility.
12. Integrate a variety of calibration functions: according to the depth calibration of the through wave and the bottom wave, according to the zero-scale calibration of the through-wave, according to the thick-line calibration of the bottom wave; to meet the image calibration under various conditions.
13. Integrate a variety of image processing functions: Synthetic Aperture Focus (SAFT) technology, straightening, differential, contrast, magnification, etc.
14. Integrate a variety of defect marking functions: rectangular mode, length mode, height mode, free mode, to meet the marking of various defects.
15. Scan the image can be directly copied to the pasteboard and pasted directly in the report; the scanned image can be saved as a picture. The format of the image can be BMP/JPEG/TIFF/PNG/GIF; the detection parameters and defect information are easy to view. The embedded test report template can be customized for the user.
16. Process parameter calculation tool for embedded surface workpiece scanning, multi-channel process parameter calculation tool for flat workpiece, providing user with reference for test process design.
17. The offline analysis software is compatible with both CTS-1008plus and CTS-2009 instruments.
18. Storage capacity up to 16G (external expansion to 32G), storage length up to 5000m or more (highest scanning accuracy); all-weather flaw detection data record.
19. Portable design, weighing only 3.0kg (with battery), easy to carry.
20. Large-capacity lithium battery, which can work continuously for 6 hours, with two batteries to meet the workload of one day.
Technical Parameters:
Attenuator error | Every 12dB ± 1dB |
Equivalent input noise | <40×10-9 V/√HZ |
Pulse type | Negative square wave, the emission voltage is continuously adjustable from 25 to 250V, and the step is 25V. |
Way of working | The width is continuously adjustable from 30 to 1000 ns, and the step is 10 ns. |
Damping | Single and double |
working frequency | 400, 80Ω |
Gain | 0.5 to 22.5 MHz |
Sound speed range | 0.0~110.0dB, step value: 0.1, 1.0, 2.0, 6.0dB; 0.1dB |
examination range | File provides intelligent acceleration adjustment |
Detection method | 1000~15000m/s, continuously adjustable, built-in 30 common material sound velocity values |
Display | 0.0~10000mm (steel longitudinal wave), continuously adjustable, minimum step value 0.1mm |
Pulse shift | Forward, negative, full wave, radio frequency (RF) |
Probe zero value | Industrial grade, TFT 8.4" WVGA color LCD display with resolution of 800×600 |
Pulse repetition frequency | -7.5~3000μs |
Vertical linearity error | 0~999.9μs |
Horizontal linearity error | 25~1000Hz, automatic and manual adjustment |
Sensitivity margin | ≤4% |
Resolution | ≤0.4% |
Dynamic Range | ≥60dB (200Φ2 flat bottom hole) |
inhibition | ≥34dB (5P14) |
Electrical noise level | ≥30dB |
interface | (0~90)%, does not affect linearity and gain |
power supply | <10% |
Internal storage capacity | C6, TOFD, encoder, USB, LAN (RJ45), HDMI interface power interface |
Scan length | Large capacity lithium battery for 6 hours of continuous operation, DC: 12V DC adapter |
Recording method | 16G (external expandable to 32G) |
Sampling depth | 0~40000mm automatic scrolling, the internal storage length is more than 5000m |
Dear customer,
We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .
Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.
Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.
If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba
We firmly believe that science and technology is no boundaries
Our mission is to make every effort to contribute to all humanity.