CRH03.75.60.08 portable hand-operated compression rivet machine
Formal Name | pressurized oil-air cylinder clinching machine |
Model | CRH03.75.60.08 |
Machine No. | 12041692 |
The supercharger oil cylinder No. | 12035154 |
Total travel | 60 mm |
Power travel | 10 mm |
Max oil pressure | 234 bar (when inputting 6 bar air pressure) |
Max. force | 90 KN |
Pressure sensor No. | 20 121A |
Control system | STE-01-H-08 |
Power supply | 220V/50HZ |
Control electrical source | DC24V |
Power | 50W |
Rated minimum pressure | 3 bar(Below this pressure equipment action will be difficult) |
Rated maximum pressure | 6 bar(Higher than the air pressure equipment will be damaged) |
Air source | Require the compressed air by filtering and drying |
Special notice | Compressed air through the dry processing, or reduce the service life of the equipment |
Evironment temperature | -5~40°C Non-condensate |
Atitude | <=1200m |
Rlative humidity | <=85% |
hand clamp clinching machine introduction
First, Equipment:
The machine is made of compressed air-driven device with low power consumption, noise and pollution-free, with soft features in place.
Equipment needs the clean, dry compressed air-driven, pneumatic: 3-6bar;
Second, the design and manufacture based on:
Both sides confirmed in accordance with supply and demand of the Technology Agreement.
One-hand button switch electric control systems (components imported brands)
Start button for one-handed, fast way to work on fast-mode access to the work piece in place a small force, no impact, no noise,
Mold work piece contacts, travel to work by force, no rivets to connect the beginning of parts, pressure control equipment relays return until the set pressure to ensure that product to connect qualified, automatically and quickly return, release the button on his hands, the device is in a state of the next cycle of work.
Technical data of portable hand-operated compression rivet machine
First, Equipment:
The machine is made of compressed air-driven device with low power consumption, noise and
pollution-free, with soft features in place.
Equipment needs the clean, dry compressed air-driven, pneumatic: 3-6bar;
Second, the design and manufacture based on:
Both sides confirmed in accordance with supply and demand of the Technology Agreement.
Third, equipment and technical parameters of the main components:
1. Hand clamp equipment
Model: ECR3-75.60.08 1 set
HZ special tanks (Model: HZ07-60) + Booster (Model: HMPS125-78) + high-pressure pipeline
1.1 HZ special tanks (Model: HZ07-60) 1 set
The total trip 60mm,
250bar hydraulic pressure, the output force 76KN
Switching valve with our itinerary (External)
With valve stroke adjustment force "X" Valve
1.2 Turbocharger (Model: HMPS125-78) 1 set
6bar maximum input pressure, high pressure 220bar oil output
Oil output for quick trips: 500cc, oil output by power trips 60cc
1.3 high-pressure tubing (5 m) 1 set
1.4 ECR3-75. 60 hand clamp body 1 set
The overall structure of the use of high-quality steel plate
To ensure that the body stiffness and strength
60mm deep throat
1.5 2 +2 connecting mold for the cold plate without rivets 2sets
1.6 Pressure riveting die 1 set
Pressure screw M3, M4, M5, M6
Pressure stud M3, M4, M5, M6
1.7 Control System 1 set
STE-01-H-08
One-hand button switch electric control systems (components imported brands)
Start button for one-handed, fast way to work on fast-mode access to the work piece in place a small
force, no impact, no noise,
Mold work piece contacts, travel to work by force, no rivets to connect the beginning of parts, pressure
control equipment relays return until the set pressure to ensure that product to connect qualified,
automatically and quickly return, release the button on his hands, the device is in a state of the next
cycle of work,
1.8 1 set of removable shelf
Model:ECR3-45,hydraulic drive, Oil pressure250bar,Fmax=45KN
Model:ECR3-75, hydraulic drive, Oil pressure250bar,Fmax=75KN
CRH03.75.60.08 portable hand-operated compression rivet machine
sample of portable hand-operated compression rivet machine