Specification | Epoxy Resin | TC-100A | TC-110A | Standard | ||||
Appearance | Colorless Transparent Liquid | Colorless Transparent Liquid | ------- | |||||
Color | <10 | <10 | Pt-Co | |||||
Density (g/cm3) | 1.1-1.2 | 1.1-1.2 | Hydrometer | |||||
Viscosity (mPa.s 25℃) | 11000-14000 | 2000-3000 | GB/T 22314-2008 | |||||
Epoxy equivalent (g/eq) | 450-500 | 180-190 | GB/T 4612-2008 | |||||
Hardener | TC-100B | TC-110B | Standard | |||||
Appearance | Colorless Transparent Liquid | Colorless Transparent Liquid | -------- | |||||
Color | <15 | <15 | Pt-Co | |||||
Density (g/cm3) | 1.1-1.2 | 1.0-1.1 | Hydrometer | |||||
Viscosity (mPa.s 25℃) | 300-500 | 2000-3000 | GB/T 22314-2008 | |||||
Note:Typical performance should not be considered as product specifications |
Specification (1) | Epoxy Resin | FL210-A | Standard | |||
Appearance | Colorless Transparent Liquid | ------- | ||||
Viscosity (mPa.s 25℃) | 1000-2000 | GB/T 22314-2008 | ||||
Epoxy equivalent (g/eq) | 195-210 | GB/T 4612-2008 | ||||
Hardener | FL210-B | Standard | ||||
Appearance | Colorless Transparent Liquid | -------- | ||||
Viscosity (mPa.s 25℃) | 100-200 | GB/T 22314-2008 | ||||
Note:(1)Typical performance should not be considered as product specifications | ||||||
Mixing and Processing | The resin system shall be mixed in the following proportions | |||||
FL210-A | FL210-B | |||||
Mass Ratio | 100 | 50 | ||||
Mix Viscosity (mPa.s 25℃) | 1000-1500 | |||||
Processing time 25℃ | 50-80min | |||||
Cure Condition | 25℃/12-48hours/ 60℃ 2-4hours |
Information | CNMI Industrial Epoxy resin HL310 is a kind of epoxy resin cured at room temperature and low temperature. It has low calorific value, good smoothness, natural defoaming, low viscosity, high strength and high hardness. It can be cured at room temperature or heating. | |||||
Specification (1) | Epoxy Resin | HL310-A | Standard | |||
Appearance | Colorless Transparent Liquid | ------- | ||||
Color | <10 | Pt-Co | ||||
Density [g/cm3] | 1.1-1.2 | Hydrometer | ||||
Viscosity (mPa.s 25℃) | 1000-2000 | GB/T 22314-2008 | ||||
Epoxy equivalent (g/eq) | 195-205 | GB/T 4612-2008 | ||||
Hardener | HL310-B | Standard | ||||
Appearance | Colorless Transparent Liquid | -------- | ||||
Color | <15 | Pt-Co | ||||
Density [g/cm3] | 0.95-1.05 | Hydrometer | ||||
Viscosity (mPa.s 25℃) | 20-100 | GB/T 22314-2008 | ||||
Amine [mgKOH/g] | 400-500 | GB/T 4612-2008 | ||||
Note:(1)Typical performance should not be considered as product specifications |