CNMI INDUSTRIAL - Epoxy Resin 16oz Mixed 3:1Ratio Adhesives Epoxy Resin Craft Kit for Resin Jewelry Acrylic Pour Paintings Molds River Table
The most advanced epoxy coating on the market!
The biggest Producer For Epoxy Resin and Hardener in China!
Modified Epoxy Resin and Hardener from Raw Material, Not only Physical Mixing!
Epoxy Resin Craft Kit for Bar Tops Tabletops Countertops
Epoxy Resin for Floor
Epoxy Resin Craft Kit for River Table/DIY
Information |
CNMI Industrial Epoxy resin AR-1 is a kind of epoxy resin cured at room temperature and low temperature. It has low calorific value, good smoothness, natural defoaming, low viscosity, high strength and high hardness. It can be cured at room temperature or heating. |
||
Specification (1) |
Epoxy Resin |
AR-1A |
Standard |
Appearance |
Colorless Transparent Liquid |
------- |
|
Viscosity (mPa.s 25℃) |
500-1000 |
GB/T 22314-2008 |
|
Specific Gravity 25℃ |
1.05 |
GB/T 4612-2008 |
|
Hardener |
AR-1B |
Standard |
|
Appearance |
Colorless Transparent Liquid |
-------- |
|
Viscosity (mPa.s 25℃) |
100 |
GB/T 22314-2008 |
|
Specific Gravity 25℃ |
0.96 |
GB/T 4612-2008 |
|
Note:(1)Typical performance should not be considered as product specifications |
Mixing and Processing |
The resin system shall be mixed in the following proportions |
||||
|
AR-1A Epoxy Resin |
AR-1B Hardener |
|||
Weight Ratio |
100 |
33 |
|||
Processing time 25℃ |
40-60min |
||||
Cure Condition |
25℃/8-10hours/ 60℃ 2-4hours |
||||
Hardness |
shore D |
<85 |
|||
Voltage resistance |
KV/mm |
22 |
|||
Bending strength |
Kg/mm2 |
23 |
|||
Volume resistance |
Ohm3 |
1x1015 |
|||
Surface resistance |
Ohmm2 |
5X1015 |
|||
Thermal conductivity |
W/M.K |
0.61 |
|||
Inductive loss |
1KHZ |
0.42 |
|||
High heat resistance temperature |
℃ |
80 |
|||
Water absorption |
% |
<0.15 |
|||
compressive strength |
Kg/mm2 |
13.4 |
100% VOC free. Virtually odorless.
Use in odor-sensitive areas such as wineries, restaurants, kitchens, or confined spaces. CNMI Industry epoxy will out perform, out protect, outshine and outlast anything on the market |
Q1.Will the Epoxy Resin Craft Kit turn yellow over time?
A: No, because we add HALS ,which is UV protection,it won't change yellow.
Q2. Will this Epoxy Resin Craft Kit tend to scratch over time?
A:Our product is Scratch Resistance ,Heat Resistance ,Electrical resistance.
Q3. What is the ideal temperature to make Epoxy Resin Craft Kit mix?
A:The optimal temperature is 25 degrees Celsius, because our laboratory temperature is 25 degrees Celsius, but a little hotter or a little colder is also ok.
Q4. How long can this Epoxy Resin Craft Kit last if it is not mixed?
A:The shelf life is about 12 months, if you keep it well.
Q5.What’s payment you do you accept?
A:Payment for TT, LC At sight. If you have good Credit or We cooperation long time, the OA. DP, CAD also workable.
Q6.Could you accept OEM ?
A:Yes, we can do the packing according to your demand, The packing bag, and the label all can do your brand.
Q7: Which Model I need ?
A:We have lot of model for different usage, Such as: the ratio is 1:1 for Bar Tops, Tabletops & Countertops. Ratio 2:1 for Epoxy Floor, Ratio 3:1 for casting river tablet.