ACCET025 rj45 utp cat5e 8p8c male connector EIA/TIA B.2. FCC compliant.
Type | CNCOB Hot selling CAT8 network Machine Patch Female Straight In Cat.5e Cat.6 Plug Rj45 Connector |
Gender | Male |
Application | Network, ethernet, data center, home router |
Performance Category | Cat8 |
Transmission speed | 10gbps |
Color | Normally transparent color, other color is available |
Inner wire | 1.0mm (Single liner) |
Housing Material | 100% imported Japan Tenjin PC |
UL Flammability Rating | UL 94V-2/94V-0 |
Contact material | Normally Brass copper, Phosphor bronze is available |
Prong type | 2 prongs / 3 prongs |
Gold plating | 50U are available |
Shielded | Copper shielded/Iron shielded |
MOQ | 5,000pcs |
Package | Normally 1,000pcs/bag, 9,000pcs/carton (43.5*34.5*29.0 CM) |
Certification | UL,CSA,CE,SGS,ROHS,ISO:9001 |
Application | High-end machine room, Hd monitoring, High-speed rail Subway, Internet, Artificial intelligence (AI),5G and other equipment. |
1. Guarantees 100% compliance CE,Rohs,UL. ISO.
2. Sevice: OEM/ODM.
3. Molded-strain relief construction for flexible movement, durability, and fit.
4. Reduces cross talk and interference with aluminum undermold contacts.
1 Use occasions
Cat.8 Assembly type industrial interconnect Modular plug,Suitable for the connection and signal control of robot towing chain, High-end machine room, Hd monitoring, High-speed rail Subway, Internet, Artificial intelligence (AI),5G and other equipment.
2 Super tensile strength
After the boot is installed into the sticking point of the modular plug,then do Tensile test,The boot part can hold a tension of 20KG(196N) for 1 minute without any abnormal appearance, The total wires can withstand the tension of more than 20KG(196N) after the contact puncture the wires, Transient section of electrical signal<5μs.
3Standard Test
The product is assembled into a patch cord with the matching CAT8 network cable, then tested by Fluke Network tester test, can fully meet the requirement of CAT8 Link test standard.
4 Products matching
This type of Modular plug can be installed into the network cable which OD is 5.5-9.0mm, and also suitable for the inner wire ID:1.1-1.5mm.
5Firm structure
The plug and booth are assembled with double sides and 4 sticking points,
Tightly coupled,The overall structure is very solid and stable, 2 sets of stop points are designed for upper and lower of the shielding shell of modular plug, To match with modular plug, the front of boot is designed to adding 4 square hole steps for installation and fixation.
6 Excellent selection of material
Contact,Using phosphor copper C5191-R,Small conductive resistance and good strength, contact surface gold plated 50U”,Low contact resistance and good transmission performance.
Shielding shell of plug:Using brass, which thickness is0.40mm, Enhanced the overall structural strength of modular plug, can greatly reduce the interference of signal transmission.
PC Housing,Boot material,Both PC,Fire rating up to UL 94V-0.