1 x ISO20 Tool Holder
Hi, Welcome to our shop. This item has stock in Germany,Russia,Ukraine, and USA warehouse. Can be shipped directly from Russia, Ukraine, Germany and USA, Free VAT, and fast shipping , ship by DHL/ Deutsche Post / IML /UPS etc..Any question,pls feel free to contact me.Tks.
1. Product overview
Spindle installation explanation
1) Circulating Cooling System Description
The system must ensure that the cooling water temperature of supply spindle is between 24-28deg. Usually setting the flow switch in return pipe of the cooling system,to ensure the supply of spindle cooling water. Cooling water requirements: we recommend using distilled water, while recommend Feinuokesi (Fenix) protective agent F1 (using the scale of 1: 200),coolant temperature is 26deg±2deg,inlet, outlet pipe temperature can’t exceed 5 deg.It is allowed As long as other monitoring can ensure fuller spindle cooling.
2) Air sealing control
In order to prevent water or impurities enters internal of the spindle,spindle will have gas sealing device,the gas seal machine must be started start with the machine at the same time. And the need to go through multi-stage filtration.
3) Compressed gas quality requirements
The quality requirement of gas which is used in gas seals:
Oil content:<0.01mg/m3
Solid particle:<5µ m
Pressure dew point: <7.5deg(0.7MPa)
4) Running-in program instructions
Only all monitoring issued no failures operational signals,at the same time,all safety devices have been installed and working properly,then allow start spindle.
Note: New or spindle which is not used for a long time must to be running slowly.First,start run spindle for half an hour as 25% of the maximum speed,then increase to 50% of the maximum speed,to run 15 minutes,finally, increase to maximum speed.It’s need to check the temperature of the spindle during the whole process, spindle will get hot, but not hot hand, if the spindle becomes hot, pls stop the operation and contact our customer
1.Q:Can I get any sample firstly before place order?
A:Of course, we are honored to offer you samples for your check.
2.Q:Do you have the products in stock?
A:Each of our products has a regular quantity of stock in the warehouse, if the order quantity is not large, it can be shipped directly. If you need more, please contact us to verify the delivery date, thank you.
3.Q:What's the delivery time?
A:It usually takes about 5-7 work days, There will be a slight gap between specific products and quantities.
4.Q: How does your factory do regarding quality control?
A: Quality is priority. We always attach great importance to quality control from the beginning to the end of the production. Every product will be fully assembled and carefully tested before packed.
5.Q:What's your warranty terms?
A: We offer different warranty terms for different products. Please contact with us for details.
Shipping
Problem&Feedback
Refund