GUTE CNC sawing and arranging line is a kind of intelligent processing equipment that automatically cuts, thickens, laps and polishes the steel bar. The equipment can automatically cut the reinforced bar into the required length according to the demand. And arrange the bar of the good material, and realize the process of automatic upsetting, threading and grinding. It has the characteristics of high cutting efficiency, precise length, energy saving, simple operation, etc. Reinforced reinforced concrete - steel ferrule - port grinding only needs one person to operate, and then one person can receive the material, which greatly reduces the work intensity of the workers, and at the same time is safer and more standardized. Take the double-head ferrule 9 meters long 32 thread steel as an example. It can process 1200-1500 silk heads (about 20 tons of steel bars) per shift for 8 hours per shift, which is an efficient choice for reinforced bar processing.
1) The servo motor is used to control the length, and the sawing precision is high; the steel bar after sawing is automatically cut and the threading is convenient.
2) High degree of automation, multi-batch work tasks can be set, and it can be used immediately during processing, eliminating the trouble of frequently setting system parameters.
3) The band saw has a pneumatic flushing device to improve the cycle precision of the rebar.
4) High Saving Bending Graphics:Large storage capacity can save 400 processing geometric graphics, high degree automation;
5) Electrical appliances are all well-known brands, Delta PLC, EURA servo controller and servo motor, stable operation and quality assurance.
6) Hydraulic control sawing feed to achieve step less speed regulation; work piece clamping is clamped by hydraulic double vise to make the saw blade run smoothly; band saw blade adopts rolling bearing and carbide guide to extend the service life of the saw blade.
Brand: Kinco
Original: China
Chinese Top brand PLC control system with touch panel, easy for users to input figures.
Model: GB4240
Original: China
It adopts the special custom-made model of the famous Chen long sawing machine. It can cut 13 pieces of 32mm rebar in a single time and only takes 3min when it is used. It is equipped with hydraulic double vise clamping to make the saw blade run smoothly.
Material: Forged alloy
Original: China
The steel bar will be transfer fully automatic, labor saving for the factory.
Brand: EURO
Original: China
Chinese Top brand servo motor, high accuracy with high quality.