Technical Parameters
LY CNC 6040 Z-VFD 2.2KW USB 4axis parameters:
Machine Dimensions
810X640X480mm
Rack material
6061 and 6063 Hard aluminum alloy (The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.)
Engraving area
600X400mm
Z-Axis Stroke
80mm, Engraving depth depends on the length of the tool edge
Acceptable material thickness
≤80mm
Rail type
Chromeplate shaft + Linear Bearings, Surface harden
ng 61HRC
Type of screw
Ball screw 1605, Pitch 4mm
Spindle motor
2.2KW VFD water cooling spindle , 0-24000r/min
Collet type
ER11,1/8"(3.175mm) Collet
Stepper motor and drive
two-phase hybrid stepping motor 57BYGH56-4011YD, 8 segments drive.
Maximum operating speed
4000mm/min (Engraving speed : 300-3000mm/min)
Repeat positioning Accuracy
0.03mm
Communication interface
USB port
Software Compatability
Mach3/Emc2/Kcam, (Type3,Wentai, ArtCAM, coppercam)
Command code
G code/.nc/.ncc/.tab/.txt
Machine weight
78kg
Rotation Axis (4th Axis)
Description:
Chuck Size: 80mm self-centering chuck
Center height: H = 49mm
Clamping diameter: 80mm or less
Deceleration mode: synchronous wheel / belt
Deceleration ratio: 3:1
Stepper motor: 57 type / 2A two phase 4 line
Positioning accuracy: 0.075 °
The machine already assembled & tested well,can directly use after take them out from package!
Packing list:
1× CN
1×