We are the top one and professional semi-trailer supplier.
We can give you better product and favorable price.
3 Axle low deck trailer is commonly used to haul heavy equipment and machinery, such as excavators, bulldozers, and other large construction equipment. The semi low loader trailer is perfect for hauling large equipment like this because they are usually tall and wide and would exceed standard legal height and weight restrictions.
Heavy low deck trailer is tested to ensure that our semi-trailers are free of problems. All heavy haul trailer is tested for carrying capacity after production is finished. We have dedicated technical staff to guide the operation.
Please leave your inquiry if you have any questions.
Tare Weight |
About 8.5T |
Dimension(mm) |
13000x3000x2950mm |
Loading capacity(ton) |
50T |
Axles |
13T/16T ,FUWA/ BPW/ CIMC Brand |
Tire |
12.00R22.5 or 315/80R22.5, optional |
Rim |
9.00-22.5 or 9.75-22.5 |
Suspension |
Mechanical suspension |
Spring Leaf |
90(W)mmx13(Thickness)mmx10 layers or 100mmx12mmx12 |
King Pin |
JOST brand 2.0 or 3.5 inch (bolted or welded) |
Landing Gear |
JOST brand D200T or Chinese brand 28tons(double-speed) |
Main Beam |
Height: 500mm, Upper plate:14mm, Middle plate:8mm, Bottom plate:16mm, Material:Q345B steel |
Side Beam |
16mm or 18mm steel channel (material: Q235 steel) |
Platform |
3mm-thick checkered plate |
Brake Chamber |
WABCO RE 6 relay valve; T30/30+T30 spring brake chamber(TKL brand), 45L air tank |
Ladder |
Spring or Hydraulic ladder |
valve |
WABCO valve (specially intended for oversea market) |
ABS |
Optional |
Light |
LED light (specially intended for oversea market) |
Voltage |
24V |
Socket(Receptacle) |
7-pin Socket (for 7 wire harness) |
Tool Box |
1m x 0.5m x 0.5m (The tool box contains 1 tire spanner, 1 gudgeon sleeve and 1 cranking bar. Its size can be tailored to suit your needs) |
Painting |
Sandblasted, anti-rust chassis surface is available with 1 layer of anticorrosive primer and 2 layers of top coats |
Shipping Terms |
Transported by the bulk carrier in an RORO or 40ft container |
Highly robust structure steel with tensile and high load capacity, 40-100 ton loading capacity.
Mechanical spring ramp is standard for easy loading and unloading.
Lower working platform height, working platform height from 850mm-1200mm
Heavy duty mechanical spring suspension for high loads requirements needs.
Length and width of lowbed avaiable custom made
Production Process of CIMC Lowbed Semi Trailer
Before production, CIMC technical department must first design and produce drawings according to the needs of the user and the market, so that the technical parameters of the main trailer are matched, and then transferred to the manufacturing department.
1. Stage of cutting steel sheet material
According to the drawings of each part produced by the design department, each part is cut out with a CNC cutting machine, such as beam webs, reinforcement plates, standard small accessories and so on.
2. Opening, calibration beam, through beam
First cut out the web of the beam to cut out U-shaped holes through which the beams can pass, and then fix the welded I-beams in parallel. The result of comparing the beams is very important. If two I-beams have large parallel errors, very serious tire wear will occur.
3. Submerged arc welding beams, beams fixed
The second step is to fix the cut web and the upper and lower wing plates to weld points, and then weld the beam by submerged arc welding.