Product No | CL12 | CL12 | CL12 | CL12 | |
Installation method | Flush | Non-Flush | Flush | Non-Flush | |
Detection distance | 2mm±10% | 4mm±10% | 2mm±10% | 4mm±10% | |
Set distance | 0-1.6mm | 0-3.2mm | 0-1.6mm | 0-3.2mm | |
Specification size (mm) | M12*1*42 | M12*1*42 | M12*1*55 | M12*1*58 | |
Output Mode | NPN NO | CL12-RF2DN1 | CL12-RN4DN1 | CL12-RF2DN1-A | CL12-RN4DN1-A |
NPN NC | CL12-RF2DN2 | CL12-RN4DN2 | CL12-RF2DN2-A | CL12-RN4DN2-A | |
PNP NO | CL12-RF2DP1 | CL12-RN4DP1 | CL12-RF2DP1-A | CL12-RN4DP1-A | |
PNP NC | CL12-RF2DP2 | CL12-RN4DP2 | CL12-RF2DP2-A | CL12-RN4DP2-A | |
Technical Parameters | |||||
Standard Detection Object | iron 12x12x1mm | iron 15xl5x1mm | iron 12x12x1mm | iron 15xl5x1mm | |
Response Frequency | 1.5kHz | 0.4kHz | 1.5kHz | 0.4kHz | |
Movement Differential | Less than 10% of detection distance | ||||
Supply Voltage Service Voltage Range | DC12-24V ripple (P-P) 10% or less (DC10-30V) | ||||
Consumed Current | less than 13mA | ||||
Switching capacity | less than 200mA | ||||
Residual voltage | Under 2V (load current 200mA, conductor 2m long) | ||||
Indicator | Action display (red) | ||||
Protection circuit | Reverse protection, surge absorption, load short circuit protection | ||||
Ambient temperature range | Working: -25~ + 70°C, Storing: -40~+ 85°C(no freeze, no dew) | ||||
Ambient humidity range | Working / Storing: 35~95%RH (no dew) | ||||
Temperature Effect | Temperature range from-25 °C to 70 °C is 23 °C, the detection distance is less than ±10%. | ||||
Influence of Voltage | In the range of ±15% of the rated power supply voltage and ±1% of the rated power supply | ||||
Insulation Resistance | Above 50MΩ ( DC500V megger) between the whole charging part and the shell | ||||
Withstand voltage | AC1, 000V 50/60Hz lmin between the whole charging part and the shell | ||||
Vibration (Durability) | 10~55Hz up and down amplitude is 1.5mm, 2 hours in X,Y,Z directions | ||||
Impact (Durability) | 300m/s² 10 times in X, Y, Z directions | ||||
IP Grade | IEC standard IP67 | ||||
Connection mode | 2m PVC cable | 2m PVC cable | M12 4-pin connector | M12 4-pin connector | |
weight | About 54g | About 52g | About 15g | About 14g | |
Material | Case: nickel-plated brass, Test surface: heat-resistant ABS, standard cable (black) PVC |
How and how long can I get a sample to check your quality? Can I expect to get the sample?
After price confirmation, you can require for samples to check our quality. Then after you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-5 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
Can you do the design for us?
Yes. Send us high resolution images, your Logo and text and tell us how you would like to arrange them, We will send you finished files for confirmation.
What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Normally we have enough stock about standard products, delivery can be made within 1~2 days once order confirmed, if our stock is not enough, production time is about 2~3 weeks.
Do you have inspection procedures for sensor?
100% self-inspection before packing.
Can I have a visit to your factory before the order?
Welcome! Our factory address: No. 376, Xunye Road, Sheshan Town, Songjiang District, Shanghai, China.