CHANKO CPA-TF15MN3 cylindrical M18 Through Beam Reflection15m sensing distance NPN NO+NC with 2m cable photoelectric sensor
| Sensor Type | Through Beam Reflection | Diffuse Reflection | ||||
| Type | NPN output | Cable | CPA-TF15MN3 | CPA-DF100N3 | CPA-DF300N3 | CPA-DF1MN3 |
| NPN output | Connector | CPA-TF15MN3-A | CPA-DF100N3-A | CPA-DF300N3-A | CPA-DF1MN3-A | |
| PNP output | Cable | CPA-TF15MP3 | CPA-DF100P3 | CPA-DF300P3 | CPA-DF1MP3 | |
| PNP output | Connector | CPA-TF15MP3-A | CPA-DF100P3-A | CPA-DF300P3-A | CPA-DF1MP3-A | |
| Detection Distance | 15m | 100mm | 300mm | 1m | ||
| Spot Diameter (Reference Value) | --- | 40×45mm | 40×50mm | 120×150mm | ||
| Standard Object Detection | Opaque objects above φ 7mm | White paper:300×300mm | ||||
| Return Difference | --- | The detection distance is less than 20% | ||||
| Direction Angle | Minimum 2° | --- | ||||
| Light Source (Wavelength) | Red infrared ray emitting diode(850nm) | |||||
| Supply Voltage | DC12~24V ripple (P-P) less than 10% (DC10~30V) | |||||
| Consumed Current | Below 40mA (Emitter below | Less than 25mA | ||||
| 25mA, Receiver below 15mA) | ||||||
| Control Output | NPN/PNP (collector open-circuit output) load current below 100mA (residual voltage below 3V), load supply voltage less than 30V | |||||
| Action Mode | Dark ON / Light ON select by wire connection | |||||
| Indicator | Action indicator (orange) | |||||
| Stable indicator (green) | ||||||
| Power indicator (green): through beam emitter only | ||||||
| Protection Circuit | Power supply reverse connection protection, surge absorption, load short circuit protection | |||||
| Response Time | 0.5ms | 1ms (0.5ms is upgrading) | ||||
| Sensitivity Adjustment | Single knob | |||||
| Ambient Illumination (Receiver Side) | Lighting collecting surface illumination incandescent lamp: below 3000lx, sunlight: less than 10000lx | |||||
| Ambient Temperature Range | Working: -25 ~ 55 ℃ / Storing: -40 ~ 70 ℃ (no freeze, no dew) | |||||
| Ambient Humidity Range | Working: 35~85%RH/ Storing: 35~95%RH (no dew) | |||||
| Insulation Resistance | Above 20MΩ(DC500VMeg-ohmmeter) | |||||
| Withstand Voltage | AC 1,000V 50/60Hz 1min between the whole charging part and the shell | |||||
| Vibration (Durability) | 10~55Hz up and down amplitude is 1.5mm, 2 hours in X, Y, Z directions | |||||
| Impact (Durability) | 300m/s 2 3 times in X, Y, Z directions | |||||
| IP Grade | IEC standard IP65 (Note: no knob IP67) | |||||
| Product Weight | Cable | About 94g | About 50g | |||
| M12 Connector | About 80g | About 55g | ||||
| Material | Case | ABS | ||||
| Lens / Display Window | PDM | |||||
| Knob | POM | |||||
| Nut | ABS | |||||
| Accessory | Instructions, M18 nuts (4) | Instructions, M18 nuts (2) | ||||
Any requirements or question,welcome to "Send" us an e-mail Now!!
!
How and how long can I get a sample to check your quality? Can I expect to get the sample?
After price confirmation, you can require for samples to check our quality. Then after you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-5 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
Can you do the design for us?
Yes. Send us high resolution images, your Logo and text and tell us how you would like to arrange them, We will send you finished files for confirmation.
What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Normally we have enough stock about standard products, delivery can be made within 1~2 days once order confirmed, if our stock is not enough, production time is about 2~3 weeks.
Do you have inspection procedures for sensor?
100% self-inspection before packing.
Can I have a visit to your factory before the order?
Welcome! Our factory address: No. 376, Xunye Road, Sheshan Town, Songjiang District, Shanghai, China.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier