SPECIFICAITONS:
Power source:220V/AC~240V/AC
Power frequency: 50-60HZ
Time –delay: min: 10±3sec max: 7±2min
Detection angle: 360º
Ambient light: <3LUX-2000LUX
Working temperature: -10-40℃
Detection distance: 6m max(<24℃)
Rated load: 2000W (incandescent lamp)
1000W(energy-saving lamp)
Power consumption: <0.9W(work),<0.5W(static)
Installation height: 2.2-4m
Detection motion speed: 0.6-1.5m/s
Working humidity: <93%RH
The product is the new saving-energy switch adopted the good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, sawing-energy and practical functions. Three detectors inside compose a wide range detection field, they utilize the infrared energy from human as control-signal source to start the load at once when human enter detection field. And they can identify day and night automatically. It is easy to install and used widely, possessing the power show and detecting show functions.
Connection:
1.Switch off the power.
2. Please move the upper cover with anti-clockwise whirl as per the diagram in the crust.
3. Fix the bottom on the selected position with the inflated screw.
4. Connect the power and the load to sensor as per the connection-wire sketch diagram.
5. Buttoning the upper cover on the sensor,whirling the cover with clockwisw,then you could switch on the power and test it.
Connection illumination:
Connect L,N with power;
Connect N,A with load.