CECTN 400V 6800uf Capacitor
1.Basic parameters
Rated voltage | 400V | Rated Capacity | 6800uF |
Temperature | 85℃ | Service lift | 2000h |
Weight | About 1020g | Package size | 77*155mm |
Installation method | Clamp fixing | Accessory | Screw M6*12 2PCS |
Packing quantity | 12pcs/Ctn | Accessory | Clamp 1PCS |
2.Performance parameters
Rated voltage (V.DC) | Surge voltage (V.DC) | Rated Capacity (μF) | Capacity deviation (%) | Loss tangent (MAX) | ESR typical value (mΩ) | Leakage current mA , MAX, 5min | Rated ripple current (A) |
400 | 450 | 6800 | -20~+20 | 0.20 | 19 | 5 | 16 |
At 120Hz 20℃ | 85℃ 120Hz | ||||||
Climate Category Environmental Category : 40/085/56 |
3.Size introduction
D: 76.9mm | d2MAX: 17.4mm | L: 155mm | L1: 160.8mm | Screw: M6X12 |
c: 88.9mm | d: 98.4mm | a: 31.7mm | H: 30mm | Number of casing layers: 2 |
4.Internal structure
5.Bolt type electrolytic capacitor sleeve description (double sleeve, negative label)
6.Bottom code description
7.Detailed printing information
8.Packaging Information:
CECTN electrolytic capacitors are fixed by upper and lower pads made of EPS (polystyrene foam) material. EPS material has good waterproof, impact and anti-extrusion properties, which can better protect electrolytic capacitors.
The CECTN aluminum electrolytic capacitor is discharged by a conductive strip, and a conductive strip with a resistance of about 3k ohm is mounted on the pad, and the product is always discharged after packaging. Compared with other electrolytic capacitor manufacturers, direct short-circuit discharge such as steel wire can better protect the bolt aluminum electrolytic capacitor.
According to the diameter of the electrolytic capacitor, the number of CECTN capacitors per box is divided into six types in the following table:
Electrolytic capacitor diameter | pcs/ctn |
51.6mm | 22pcs/ctn |
64.3mm | 15pcs/ctn |
76.9mm | 12pcs/ctn |
91.0mm | 8pcs/ctn |
101.0mm | 6pcs/ctn |
9.Capacitor fitting (clamp mounting structure)
10.Production Process
11.Contact Us