CUMMINS engine
*In-line,
*water-cooled,
*6cylinders,
*Diesel Engine
92KW,cummins engine also could as aoptions.
SPECIFICATIONS OF SITE DUMPER FCY-100 | ||||
Model Specification | Item | Data | ||
General | Payload | 10000kg | ||
Operating weight | 9850 kg | |||
Hopper capacity | 4.5m3 | |||
Maximum speed | 25 km/h | |||
Handbrake available on grade | 25% | |||
Max grade ability | 25% | |||
Distance of road after brake | ≤2.5m with load and speed 10km/h | |||
Minimum turn radius | 4 .5m | |||
Ground clearance | 248 mm | |||
Noise level | ≤106 db(A) | |||
Loading discharge angle | 48.40 | |||
Time of discharge | 8s | |||
Hydraulic pressure | 16 Mpa | |||
Wheel base | 2000 mm | |||
Wheel tread | 1580 mm | |||
Engine power | 92KW | |||
Dimensions (LxWxH) | 7300X2400X3630MM | |||
Engine | Model | DEUTZ TD226B or CUMMINS engine | ||
Type | Diesel 4 stroke engine, 4-cylinder incline, direct fuel injection, water cooled | |||
Bore x stroke piston | 100 x 105 mm | |||
Power | 92KW | |||
Speed | 2400 R/Min | |||
Max t | 120@2100v/p | |||
Weight | 350 kg | |||
Drive System | Clutch | Single disc, dry type, constant. | ||
Diameter | 254 mm | |||
Transmission | Hydraulic type | |||
Drive shaft | Tubular-type, open-type, rigid needle-bearing universal joint | |||
Driving axle | Main drive type: single-stage hyperbolical bevel gear dive | |||
Final driving | full floating | |||
Different | hyperbolical bevel gear dive | |||
Frame | Frame | Channel steel welding type, two-section articulated connection | ||
Tire | 16/70-20 | |||
wheel ring | 9.75H | |||
Steering system | Type | Control by wheel, full hydraulic system, two cylinders double acting. | ||
Angle steering each direction | ± 30o |