Machine introduction
Fiber Laser Rust Removal Cleaning Machine is a new generation of industrial surface cleaning laser system. It adopts the advanced laser source, laser optical scanners and control system to meet the requirements of metal surface cleaning process.
Laser dry cleaning method:
Use pulses laser to clean rust directly, it will generate vibration after the laser energy is absorbed by the base or particles, then seperate the base and comtaminant.
Laser absorption rate for metal
Based on the metal surface cleaning customized laser, according to the laser absorption rate of different wavelength of materias, the prior art selection of 1064 nm solid-state lasers or fiber lasers, metal absorption rate of up to 30%, with special mode spot, both can effectively clean rusty, and also protect Base metal with no damage. Considering the stability of laser, the use of cost and integration methods and other factors, the latest technology using wavelength of 1064nm fiber laser is better than solid lasers, Maxphotoncis 100W pulse laser cleaning source, is the best configuration for hand-held laser cleaning. |
Specifications:
Model | QA-LC60 | QA-LC100 | QA-LC200 | QA-LC1000 |
Laser source | Fiber | Fiber | Fiber | Fiber |
Laser Power | 60W | 100W | 200W | 1000W |
Fiber cable L | 3 M | 3 M | 5 M | 15M |
Pulse Energy | 1.5 mJ | 1.5 mJ | 2 mJ | 50 mJ |
Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
Frequency | 50-500KHz | 50-200KHz | 20-50KHz | 10-50KHz |
Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
Cooling | Air cooling | Air cooling | Air cooling | Water cooling |
Dimension | 450*350*500 | 650*350*560 | 900*600*1100 | 830*1130*1300 |
Weight | 30Kg | 40Kg | 120Kg | 220Kg |
Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
Optional | Manual | Manual | Manual | Manual |
Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Three Phase 380V, 50HZ |
Comparison with Traditional Clean Methods:
Comparison | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning |
Washing Method | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning |
Harm to base material | None | Yes | Yes | None |
Washing Efficiency | High | Low | Low | Mid. |
Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice |
Washing result | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven |
Precision Washing | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. |
Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution |
Operation | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator. Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures required. | Easy to operate, portable or automatic. |
Investment | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Fiber laser source advantages
Laser Source |
Advantage |
Disadvantage |
Solid Laser |
1.High power, high pulse energy, high cleaning efficiency 2.Wide range non-metallic material application 3.Excellent cleaning effect, excellent cleaning ability |
1. Large consumption, need high power chiller 2. Limited integration, complicated maintenance 3. Expensive and high cost. |
Fiber Laser |
1.Free maintenance, high cost effective, low cost. 2.Forced air cooling, high stability of continuous using 3.Good laser beam mode, wide range metal application 4.Without light path problem, Flexibility integration, small and convenient 5.High photoelectric conversion rate, low consumption, energy saving and enviroment protection |
1.Low effective for thick coated metal 2.Power limited |
Principle
1 in the solid surface to produce a mechanical resonance phenomenon, is the surface of the dirt layer or condensation debris;
2 the surface dirt layer is heated and expanded, so as to overcome the adsorption force of the basic material to the dirt particles and the surface of the object is separated from the surface of the object;
3 instant to make the dirt molecules evaporate, gasification or decomposition
Application
industries: air plane and ship metal surface derusting , paint removal; building surface dirt cleaning; chip surface cleaning of micro electricy
5 Stars Reviews from our customers:
1.Q:What is the warranty of the machine?
A:1-2 years.
2.Q:Are you a factory or trading company?
A:Quesstt Laser is a factory for 22 years. Got import and export License.
3.Q:How about the quality?
A:Technology is from Germany.High quality best price.
4.Q:What is your after-sale service?
A:If needed,Questt Laser offer door to door service! We can send engineers to your factory for assembling ,adjusting and training!
5.Q:How do i get technical support after purchasing?
A:Questt Laser offer online service in English through Skype,WhatsAPP,Wechat or Email etc .If need remote operation,we can use TeamViewer software.
6.Q:How can i get assurance of my Payment?
A:Alibaba have Trade Assurance,you can pay throught Alibaba first.
( Note: Please click the photos above to watch the videos ! )