automatic core shooting machine introduction:
Foundry Hot Sand Core Shooter refers to the product cured by heating, usually heating on the mold, also known as hot core box mold, through the core shooting machine to make products, known as hot core box shooting machine.Electric heating is to put the electric heating rod inside the mold, and achieve the purpose of temperature regulation and constant temperature through the control system of the core shooting machine.Die heating is usually electric heating, but also gas heating.
Foundry Hot Sand Core Shooter is the main processing machine for manufacturing sand cores and other finished products. The products processed by it have great advantages in quality and efficiency, so large manufacturers choose it to use. But carelessness in our use will cause a lot of trouble, so it is very important to master the following use skills and precautions. We have learned a lot of technical problems in its use before, and the core shooter manufacturer Let me share with you some small points of attention that are not paid attention to when it is used, and I hope you can pay attention to it in future use. Ten operating precautions of Foundry Hot Sand Core Shooter
1, wear protective goggles and other protective equipment;
2, check the core shooter and ventilation device to ensure that they are in good condition;
3. Check the core box, sand shooting board, sand shooting head, sand shooting cylinder, gate plate and other tooling facilities to ensure that they are clean and intact, and the mutual assembly must be firm and reliable;
4. Before turning on the power and heating, turn on the water source of the water-cooled sand shooting board, and check the heating device and related electrical facilities to ensure reliability;
5. Before driving, turn on the ventilation device and release the water in the air storage bag at the same time, then turn on the air source, test the car without load, and make sure that the operation is normal before use;
6. It is strictly forbidden to touch the core box with hands during operation to prevent injuries and pinch fingers;
7. Ensure that the sand-shooting barrel has enough core sand (generally not less than 2/3 of the volume of the sand-shooting barrel) before shooting sand, and it is strictly forbidden to shoot without sand;
8. When shooting sand, the operator should avoid the sub-box surface to separate the boxes to prevent the sub-box surface from being badly sealed by sandblasting and hurting people;
9. When taking the sand core from the core box and piercing the sand hole on the sand shooting board, wear gloves to prevent burning your hands. Sand cores taken out of the core box should be stacked neatly to prevent collapse;
10. After the work is completed, it is necessary to clean up the sand shooting barrel, sand head and sand bucket in time, clean the core box and core shooting machine, and clean the work site to ensure that the work site is tidy.
These ten points are what we should pay attention to. We hope that in future production, users can pay attention to the above precautions and use the machine skillfully and quickly.
technical parameter:
item |
Z9403 | Z9404 | Z9406 |
moulding board max dimension (mm) | 500*400 | 650*450 | 780*550 |
Max sand core weight(kg) | 20 | 20 | 30 |
sand hopper volume (kg) | 150 | 150 | 300 |
locking stroke (mm) | 250-600 | 250-700 | 300-800 |
clamping force (kgf) | 1200 | 1900 | 2500 |
sand hopper capacity (kg) | 200 | 200 | 200 |
power (kw) | set accoridng to the mold's size |
Our Service:
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM&UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory : We are manufacturer, specializing in producing all kinds of machinery for more than 20 years, competitive with good quantity.
7.Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8.As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
Q:How many days will be used to produce this core shooting machine?
A:Normally within 15 workdays or according to your requirement
Q:Can you provide installation and commissioning overseas?
A:We can supply oversea service if needed
Q:Are you manufacture or trading company?
A:We are manufacture,welcome to visit our factory