CDM856 High efficiency Lonking 5 ton 162kw pay loader for scoop demilition debris
China Lonking 5 ton wheel loader powerful weichai Deutz engine CDM856
Construction Machinery CDM856(1) features:
Famous Engine
Lonking Transmission
Lonking Axle
Pilot Control
Convenient Maintenance
ROPS/FOPS
AC Cabin
Adopt worldwide top Weichai,SDEC or DF Cummins engine ,Which provide strong power,high working efficiency and reliability.
Standard equipped with Lonking transmission with two forward speed & one reverse and dry drive axles,Electro-hydraulic ZF transmission as optional choice.
Centering arranged long wheelbase, Large-span articulated design,Heavy-load adaptive ability is greatly improved.
Pilot control.
Full hydraulic power steering system with flow load-sensing,Single joystick controlling single pump shunt working hydraulic system,Together with boom lifting limitation & bucket auto-balancing function.
Dual pipeline brake system can effectively avoid brake system failing caused by part fault,Braking is more reliable.
Standard equipped with ROPS/FOPS cabin,The cabin measuring up to ergonomics is comfortable and safe.
Efficient and healthy air conditioner.
Enough space for operation and maintenance.
Select many kinds of optional working devices.
RATED POWER:160kW/2200rpm
BUCKET CAPACITY:3.0m³
RATED PAYLOAD:5000kg
OPERATING WEIGHT:17300kg
PICTURES FOR lonking wheel loader CDM 856
MAIN PARAMETER
| OVERALL DATA | |
| Bucket Capacity | 3.0m³ |
| Rated Payload | 5000kg |
| Operating Weight | 17300±300kg |
| Traction Force | 155±3kN |
| Breakout Force | 170±3kN |
| L×W×H | 8100×3010×3380mm |
| ENGINE&ELECTRICAL SYSTEM | |
| Maker/Model | WEICHAI/WD10G220E21 |
| Emission Standard | EPA (TierⅡ)/NationalⅡ |
| Engine Type | 4 Stroke,Turbocharged,Water-cooled,Direct Injection,Diesel Engine |
| Rated Power | 162kW(220hp)/2200rpm |
| Maximum Torque | 860N·m/1400-1600rpm |
| Bore x Stroke (mm) | 126×130 |
| No. of Cylinders/Displacement | 6/9.726L |
| Compression Ratio | 17 |
| Air Cleaner | Three Stage Air Cleaner with Cyclone Pre-cleaner |
| Alternator | 55Amp |
| Battery | 2-24V/120Ah |
| Starting Motor | 24V/7.5kW |
| Heating Capacity (W) | 5000W |
| Cooling Capacity (W) | 4700W |
| NO. | DESCRIPTION | UNIT | DIMENSIONS |
| A | Overall Height – Bucket Raised | mm | 5323 |
| B | Bucket Pin Height at Max. Lift | mm | 4163 |
| C | Dump Clearance at Max. Lift ( 45°) | mm | 3080 |
| D | Reach at Max. Lift and 45° Dump | mm | 1256 |
| E | Rack Back Angle at Carry | ° | 49.3 |
| F | Rack Back Angle at Ground | ° | 46 |
| G | Digging Depth | mm | 50 |
| H | Rack Back Angle at Max. Lift | ° | 58.3 |
| I | Dump Angle at Max. Lift | ° | 45 |
| J | Carry Height | mm | 400 |
| K | Ground Clearance | mm | 409 |
| L | Center Line of Front Axle to Hitch | mm | 1615 |
| M | Wheel Base | mm | 3230 |
| N | Overall Length | mm | 8100 |
| O | Departure Angle | ° | 32.6 |
| P | Height to Top of Cab | mm | 3380 |
| Q | Overall Width over Bucket | mm | 3010 |
| R | Min. Turning Radius over Bucket | mm | 7240 |
| S | Min. Turning Radius over Tires | mm | 6537.5 |
| T | Steering Angle – Left/Right | ° | 35 |
| U | Width at Tread Center | mm | 2240 |
| V | Overall Width over Tires | mm | 2835 |
| DRIVE TRAIN | |||||
| Transmission Type | Planetary Powershift Transmission | ||||
| Shift Type | Mechanical Powershift Control | ||||
| Pressure of Transmission | 1.2-1.5MPa | ||||
| Torque Converter Type | Single-stage,Duo-turbine,4-element | ||||
| Torque Ratio | 4 | ||||
| Axles | Rigid Front Axle&Oscillating Rear Axle | ||||
| Rear Axle Oscillation (°) | ±10° | ||||
| Differential | Conventional | ||||
| Main Reducer | Spiral Bevel,1-stage Reduction | ||||
| Final Reducer | Planetary Reduction | ||||
| Tire | 23.5-25 L-3 16PR TT | ||||
| Travel Speeds | km/h | 1st | 2nd | 3rd | 4th |
| Forward | 11.5 | 36 | |||
| Reverse | 16 | ||||
| BRAKE SYSTEM | |
| Service Brake | Single Circuit Caliper,Dry Brake |
| Setting Pressure | 0.70-0.78MPa |
| Parking Brake | Air Actuated Caliper Brake |
| Emergency Brake | Air Actuated Caliper Brake |
| STEERING SYSTEM | ||
| Type | Hydraulic Load Sensing System | |
| Pump | Gear Pump,176L/min·2200rpm | |
| System Pressure | 15MPa | |
| Cylinder | Type | Double Acting |
| Bore x Stroke | 2-100×324mm | |
| Steering Angle | ±35° | |
| HYDRAULIC SYSTEM | ||||||
| Type | Single-lever(Joystick) Control | |||||
| Pump | Gear Pump,220L/min·2200rpm | |||||
| Control Valve | 2 Spool (Bucket&Boom) | |||||
| System Pressure | 16MPa | |||||
| Cylinder | Lift Cylinder | 2-180×721mm | ||||
| No.-Bore x stroke | Tilt Cylinder | 1-200×563mm | ||||
| Joystick Control Pressure | 2.5MPa | |||||
| Cycle Time | Raise | Dump | Lower | Total | ||
| (Sec) | 6 | 1 | 4 | 11 | ||
| STANDARD EQUIPMENT | |
| WEICHAI Engine | Limited Lifting Position |
| LONKING Transmission | Standard Lift&Bucket (3.0m³) |
| Mechanical Powershift Control | ROPS&FOPS Cabin |
| LONKING Axles | Air Conditioner |
| Joystick Control(2 Spool) | Radio/MP3 |
| OPTIONAL EQUIPMENT | |
| ZF Transmission&LONKING Axles | Quick-change Coupler |
| ZF Transmission&ZF Axles | Quick-change Bucket |
| Cold Starting (-35℃) | 3 Piece Cutting Edge,Bolt-on Type Bucket |
| Oil-bath Air Filter | Rock Bucket(3.0m³) |
| 23.5R25 L-3 TL | Enlarged Bucket(3.5m³) |
| 23.5R25 L-5 TL | Coal Bucket(4.2m³) |
| 3rd Spool for Auxiliary Function | Log Fork |
| Sliding Cabin Window | Grasping Pitchfork |
| Electric Heating Rear Window | Side Dump Bucket(2.5m³) |
| Lockable Oil Tank Cap | Marble Fork |
| Rear View Camera | Fork(Quick-change Only) |
| Pressure Testing Connector | 4in1 Bucket(Quick-change Only) |
| High Lift &Additional Counterweight | Snow Blade(Quick-change Only) |
Found in 1993 , Lonking holding limited for short lonking is a large scale construction and logistic machinery company in longyan of Fujian Province, china it was established by Mr.Li San Yim deputy of the National People’s Congress, National Model worker, National Advanced individual of Glorious Cause. The company took the initiative to be listed in Hongkong(SEHK) among china’s construction machinery industries(stock code:03339) and was awarded the titles as Global Top 50 construction machinery manufacturer , china Top 100 Machinery manufacturer of core competitiveness and Top 100 enterprises Established by overseas Chinese.
Adhering to the principle of dealership model the company sells its products in over 50 countries and regions around the world and constantly enhance three major advantages of quality, service and cost performance . by doing this it has ensures the smoothness of sales channels and improved its after sale service ,thus wining customers’ trust.
The company attaches great importance to the corporate governance policy of being dependent on talents, management, quality, brand creativity ,trust and excellence as well as the product idea of putting people first and man-machine union, aided by lonking’ s 4 major bases,19 wholly – owned subsidiaries and over 1000 distributors both home and abroad . the company has acquires successful experience in researching, developing and manufacturing wheel loader, excavators, road rollers, forklifts, and relevant core parts and established an independent R&D center ,taking the purpose as high technology, high quality and high efficiency the company is committed to providing customs with earthmoving machine of high quality and cost performance and a complete whole solution to improve construction efficiency and generate more values.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier