Name: laser head
Original: China
There is a lens in the laser head, easy to focal the laser
Machine model | 1490 laser machine |
Laser type | Sealed CO2 laser tube, wavelenght:10:64μm |
Laser power | 40W/60W/80W/100W/150W/180W/280W/300W |
Cooling mode | Circulating water cooling |
Laser power control | 0-100% software control |
Control system | DSP offline control system |
Max. engraving speed | 60000mm/min |
Max cutting speed | 50000mm/min |
Repetition accuracy | ≤±0.01mm |
Min. Letter | Chinese:1.5mm, English:1mm |
Table size | 1400*900mm |
Working voltage | 110V/220V.50-60HZ |
Working conditions | temperature:0-45℃,humidity:5%-95% |
Control software language | English/Chinese |
File formats | *.plt,*.dst,*.dxf,*.bmp,*.dwg,*.ai,*.las,*.doc |
1. Fully automatic camera shooting and positioning system: the pattern is taken into the computer through the vision system. After computer processing, the device automatically search for the material and accurately position it for cutting, avoiding the user to be tired of operation due to inaccurate positioning.
2. Cutting path optimization function: Optimized cutting sequence, saving an average of 10%-20% of working time compared to software design without path optimization.
3. High-end DSP technology: strong data processing capability, targeted design of computer software, and cooperation with precision mechanical systems, in the case of high-speed running, the cutting lines and curves will not be deformed, thus achieving rapid continuous cutting.
4. Breakpoint memory function. Even if power cuts during machine working, when resume working, it continues cutting from the breakpoint and connects well, which ensures expensive material will not be damaged and wasted.
5. Smooth cutting edge, locking by high temperature, no fins or burrs, and improves your product quality
Name: laser head
Original: China
There is a lens in the laser head, easy to focal the laser
Name: laser tube
Brand: Reci or Yongli brand
Original: China
China famous brand (Reci, Yongli), good beam mode stability, service time over 1500~8000 working hours.
Name: power supply
Original: China
40W~180W, good quality and stable output to extend the laser tube service time.
Name: Lens
Brand: USA II-VI
Original: USA
High transmittance, good focusing, reflecting effect.
●Feature image positioning
●Mark point positioning
●Contour identification and cutting
●Ethernet data transmission with data safety verification to ensure the data accuracy when at high speed data transferred.
●Various signals and sizes operation panels for selection.
●Self-adaption identifying path planning
high precision cutting by automatic positioning
high precision cutting by scanning bar code
High accuracy 3 phase stepper motor
High quality 3 phase stepper motor
Japan belt, Taiwan square linear rail
Blade table is used for sheet materials, such as wood, plywood, mdf, acrylic, etc
Honeycomb table is used for small and soft materials, such as paper, cardboard, foam, cloth, etc
(1). Push fumes away from the focal lens to protects the lens from contaminants which could damage the lens.
(2). Blow compressed air to the material during engraving and cutting, cools the material, protect it from burning.
Exhaust fan removes smell, smoke and dust caused during engraving and cutting, protecting the machine user healthy.
The rear socket is convenient for connection of air compressor and water cooling system.
Wheels facilitates machine shifting. Holders holds the machine steady and solid.
Machiine allowing working area is 1400x900mm, but material longer than 900mm is able to pass through this rear opening.