CAN open,RS232 communicate dc servo driver 50A 24v/400W/500W 48V/800W/1KW bldc motor speed controller with RS232 for agv vehicle
CAN open,RS232 communicate dc servo driver 50A 24v/400W/500W 48V/800W/1KW bldc motor speed controller with RS232 for agv vehicle
Model:KYDBL4850-1E
1.Product overiew:
KYDBL4850-1E is an intelligent brushless DC controller. It adopts 32-bit high-performance MCU,Advanced motion control algorithm is suitable to the outside of the quadrature encoder input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication, CAN bus, CAN be widely used in automation.
Maximum Maximum Direct voltage
Output current Output voltage Working range
Model DC : (A) DC: (V) DC: (V)
KYDBL4850-1E 50 48 10-50 (95%)
2.Product Features:
| 1) Wide-range voltage input, 10-55V. |
| 2) Intelligent PID control loop. |
| 3) Working mode: Speed open-loop, close-loop control, torque close-loop control, position close-loop control. |
| 4) External potentiometer, 0-5V analog quantity or pulse command control mode, RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode. |
| 5) Safety forward & reverse control, four-quadrant operation, support regeneration. |
| 6) Enable control function. |
| 7) Maximum current control. |
| 8) 4-way input port; the function can be defined as analog input, pulse input or digital input functions. |
| 9) 2-way digital (MOS tube open-drain) output, Generally as 24V 1A output(maximum load capacity of 40V 1A), can be used to loosen the brake or other attachments. |
| 10) Abnormalities like overcurrent, overheating, overvoltage and short circuit will start the protection function. |
| 11) LED status indicator. |
| 12) CAN bus communication, see the detailed communication protocol when using it. |
| 13) RS232 communication, see the detailed communication protocol when using it. |
3.Performance Index:
a. Power voltage: 10-55VDC.
b. At the ambient temperature 25℃, continuous working current 30A, transient current up to 75A 30S.
c. Out+5VDC power (It can power up the encoder): 5V DC 20mA
d. Analog input range: 0-- 5VDC
e. Impulse input range: 500Hz—5000Hz (corresponding maximum speed)
f. [Note] The minimum impulse frequency may change along with the setting of maximum speed.
g. Input range of duty ratio 0%-- 100% (input frequency range f ≤1KHz, recommend to use the frequency of 250Hz).
h. the digital output interface: 2 road, open drain, maximum load capacity of 40 V 1 A
i. Temperature protection status: When the temperature is 70℃, the controller will reduce output by overheating protection and will stop output when the temperature is 80℃.
j. Working temperature: -30℃-- +60℃.
k. Ambient humidity: Relative humidity≤80RH.
l. Boundary dimension: L * W * H = 148mm * 117mm * 40mm
m. Weight: 800g
4.Dimension:
Boundary dimension: L * W * H = 148mm * 117mm * 40mm
24v bldc motor controller
dc servo driver
CAN open,RS232 communicate dc servo driver 50A 24v/400W/500W 48V/800W/1KW bldc motor speed controller with RS232 for agv vehicle
We pay high attention to the Motor packaging, adopt polyfoam packing and then fill them to carbon to protect the controller, this series of complete packing enable you receive good products.
brushless dc motor speed controller with RS232
We devote ourself to Research & Development, welcome Costom-made products, if you need some unusual products, let's have further communication.
Thank you for your visit. If you need brushless dc motor, servo motor and controller, please contact us as soon as possible!
Q: What are your main products?
A: We produce various kinds of dc motor & controller.
Q: Do you have your own R&D team?
A: Yes. R&D is our core competitiveness, continuous innovation is just what we are seeking for all the time. Some of our engineers have more than 20years experience in the industry, and we also cooperate with colleges, scientific research institutions and large enterprises.
Q: Is there a MOQ for your motors?
A: There is no MOQ requirement. But the more the better.
Q: How do you ensure the product quality?
A: We have strict test system in every link of material selection, production and final product, packing according to ISO9001 management.
Q:How long is your delivery time?
A:Generally it is 10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Lisa Wang
Jinan Keya Electron Science And Technology Co.,Ltd
Website: www.dcmotorkeya.com
MP/whatsapp: 0086-15589976300
Wechat:jinankeya
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier