Description | Parameter | |
X,Y,Z Working Area | 1300x2500x200mm | |
Table Size | 1950×3740mm | |
X,Y,Z Traveling Positioning Accuracy | ±0.03/300mm | |
X,Y,Z Repositioning Positioning Accuracy | ±0.05mm | |
Lathe Structure | Welded Structure | |
X, Y Structure | Rack gear Transmission, Shaft Linear Bearings | |
Z Structure | TBI Ball Screw, Shaft Linear Bearings | |
Max. Consume power | 15Kw | |
Max. Speed | 0-32000mm/min | |
Max. Working Speed | 0-20000mm/min | |
Spindle Power Motor | 2 sets independent 3.5 KW Air-coolant Spindle | |
Spindle Speed | 0-18000RPM | |
Drive Mode | Stepper Motor and driver | |
Working Voltage | AC220V/380V, 50/60Hz | |
Command | G Code, *uoo, *mmg, *plt | |
Operating System | NC-STUDIO | |
Flash Memory | 512M | |
Collet | ER20 | |
X,Y Working Delicacy | <0.01mm | |
Software | Ucancam, Artcam,Type3 | |
Running Circumstance | Temperature: 0℃~45℃ Relative humidity: 30%~75% | |
All parameters above subject to change without prior notice | Stepper Motor |