By Means of M3 Screw NTC Thermistor Standard Lug Temperature Sensor
By Means of M3 Screw NTC Thermistor Standard Lug Temperature Sensor
|
Parameter |
Value |
|
Resistance value at 25 °C |
4.7K to 100KΩ |
|
Tolerance on R25 value |
± 2%, ± 3%, ± 5% |
|
B value |
3435K, 3740K, 3984K, 4190K |
|
Tolerance on B value |
±0.5 to ±1.5% |
|
Operating temperature range at Zero dissipation |
- 40 to + 150 |
|
Dissipation factor |
23 mW/K |
|
Thermal time constant |
7.5s |
|
Min. dielectric withstanding voltage between terminals and lug |
1500 (1 s) VAC |
|
Insulation resistance between terminals and lug at 500 VDC |
min. 100 MΩ |
Mounting:
• By means of M3 screw. Leads to be soldered or crimped
• The device is suitable for screwing e.g. on metal surface
• The leads are suitable for soldering e.g. on PCB
• Other screw sizes are available on request
Features:
• Easy mounting using ring tongue terminal
• Rugged construction
• Cable of PTFE insulation acoording toNEMA HP-3, type E, rated 600 VRMS
Application:
• Suitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with the chassis is required.
• Thermistor with negative temperature coefficient and two stranded PTFE insulated copper leads.
• The device is mounted inside the barrel of the ring tongue terminal.
Notes
• The thermistor chip NTC is epoxy coated and attached to the metal lug via a middle buffer layer
• Metal ring lug is tinned copper
• PTFE insulation lead, Φ 1.12 mm
• Lead wire end twisted and tinned, other lead length and insulation, available on request
Other resistance curves and tolerances are available on request
• Consult Senstech for other lead length, other connector crimping or other features
- The application of the NTC thermistor:__________
- Working environment of NTC thermistor:________
- Operation temperature range:___℃ to ___℃
- Any requirement about sensor probe material or dimension:______________
- The R value:___K ohm ±___% at ___℃,
- The B value: B(____℃/____℃) = _____K ± ___%
Please CLICK HERE for more information !!!
OHTER OPTIONS:
Ring Lug NTC Sensor for Surface Temperature Measurement
Ring Lug NTC Thermistor Sensor
5K NTC Thermistor Sensor with Fork Terminal
|
Sensor Spec |
NTC 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K, 230K, 1000K, etc |
|
Operating Temperature |
-20~120 C, -30~250 C,-40~350 C, or to be advised |
|
Resistance Tolerance |
0.5%, 1%, 2%, 3%, 5% |
|
Protection Probe Type |
bullet type, cylinder type, surface mounting type, screw type, Epoxy resin seal plastic injection probe, cylinder probe, non-encapsulated probe, flange probe, micro-probe, clamp type, various coating configurations and shell materials are available |
|
Housing Material |
Nickel plated copper, brass, stainless steel, aluminum, ABS, PVC, PP, TPE, PTFE, PFA, silicone or to be advised |
|
Cable |
Teflon cable, PVC cable, Silicone cable, TPE cable, XL-PE cable, or to be advised by customer |
|
Length customized |
|
|
Connector |
TJC3 2.54, SMR, SMP, 5566, 5264, PH, EH, XH, 557, etc. |
|
Special Requirement |
Waterproof, dustproof, anticorrosion, or others |
|
Temperature Sensor Application |
|||
|
Electric Appliance |
Food handling & processing |
Electric Cooker, Induction cooker, Microwave oven, Deep fryer, Electeric stove, Electric oven, Toasters, Coffee makers, Ice maker, Yogurt maker, Deep fryers, Fast food processing, Perishable shipping, Temperature controlled food storage systems, Thermometers for use in food preparation |
|
|
Heating & Cooling |
Central air-conditioning system, room air conditioner, home heater, bed warmer, Electric blanket controls, Thermostats, Floor heating system, Refrigerator & freezer temp. control, |
||
|
Home Appliance |
Water heater, Boiler, Bathing machine, Washing machine, Home weather station, Pool and spa control, Audio amplifier, Dishwasher, Clothes dryer, Electronic thermometer, Garbage disposer, Water dispenser, Electric kettle, |
||
|
Small Appliance |
Thermometer, Electric Iron, Electric hair dryer, Marcel waver, |
||
|
OA |
Duplicating machine, Printer, Fax machine, Camera, Photographic processing equipment |
||
|
Automotive |
Audio amplifiers, Automatic climate control, Coolant sensors, Electric coolant fan temp. control, Engine block temperature sensors, Engine oil temperature sensors, Intake air temperature sensors, Outside air temperature sensor, Transmission oil temp. sensors, |
||
|
Agricultural |
Greenhouse cultivation, Tobacco drier, Bakeware, Granary temperature control, Tea processing machine, Aquaculture |
||
|
Industrial |
Commercial vending machines, Crystal ovens, Fluid flow measurement, Gas flow indicators, HVAC equipment, Industrial process controls, Liquid level indicators, Microwave power measurement, Plastic laminating equipment, Solar energy equipment,Thermal conductivity measurement (diamond testers etc.), Thermocouple compensation, Thermoplastic molding equipment, Water purification equipment, Welding equipment, Fire detectors, Computer power supplies, |
||
|
Medical |
Skin temperature monitors, Internal temperature sensors, Internal body temperature monitors, Clinical fever thermometers, Rechargeable battery packs, |
||
|
Others |
Amplifier over temperature sensing, Oscillator temperature compensation, Transistor temperature compensation, Cell phone, Physiological monitoring, Aircraft temperature, Fire control equipment, |
||
We believe in establishing a strong partnership with our customers through:
- Fast and cost efficient delivery of high quality applications.
- Access to highly skilled resources who are quality and delivery driven.
- Policy for a business and client focused operation.
- Responsive and strong support team for ongoing maintenance and changes.
- Passion for continued alliance with our clients to help them shape and achieve their future visions and strategies.
PLEASE CLICK HERE TO CONTACT US FOR MORE INFORMATION !!!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier