Buy Calcium Lignosulfonate as Fertilizer Adhesives for Chemical Industry

         Buy Calcium Lignosulfonate as Fertilizer Adhesives for Chemical Industry

CAS No.: 8061-52-7

EINECS:617-125-7

MF:C20H24CaO10S2

MW: 528.6 g/mol

Chemical Structure:

Calcium lignosulfonate Properties:

Calcium lignosulfonate is a brown yellow powdery substance in appearance and gives off slight aroma, with the molecular weight of 800 to 1,000 usually and strong dispersibility, cohesiveness and chelating property.                        

1) Common dosage of 0.25%, reducing the water rates up to 8-12%.

2)Increase the mobility of concrete to improve workability.

3) While maintaining concrete slump, with the same intensity and the reference concrete, can save 8-10% of cement.

4) Calcium lignosulfonate superplasticizer with micro-cited gas can increase the impermeability of concrete freeze-thaw performance.

5) This product is not corrosive to the steel reinforcement and aggregate.

 

Calcium lignosulfonate Specifications: 

 

Index Items	Standard Value	Test results
PH  Value	4-7	5.4
Dry Matter	92%min	94%
Lignosulphonate	55%min	60%
Water insoluble matter	1.0%max	0.54%

 

Calcium lignosulfonate Application:

1.Could work as plasticizer in making concrete. Also used during the production of cement, where they act as grinding aids in the cement mill and as a rawmix slurry deflocculant (that reduces the viscosity of the slurry).

2. Could be used in lead batteries to acts on crystallization of the lead sulfate thus increase the battery to get a much longer life-time.

3. Could used as a filler and binder in ceramic tiles, resins to fiber boards, casting sand and in fodder pellets.

4.Work as dust-suppression roads as well as in dusty processes within industry. Lignosulfonate is used as a dispersant in products like fodder, disperse pesticides, dyes,carbon black, and other insoluble solids and liquids into water.

5. Could reduce the viscosity of mineral slurries is used to advantage in oil drilling mud, where it replaced tannic acids from quebracho (a tropical tree).

6. Could be used for the production of plasterboard to reduce the amount of water required to make the stucco flow and form the layer between two sheets of paper. The reduction in water content allows lower kiln temperatures to dry the plasterboard, saving energy.

7. Lignosulphonates could work as a binder of powder and granular materials: for iron ore powder, lead and zinc powder, pulverized coal, coke Toner pressure on the ball; extrusion of cast iron, cast steel sand repression; mud-brick wall and floor tiles molding; mineral aggregate into a ball and provides high strength, good stability, lubrication and mold good results.