Burgmann Cartex ANSI Dual seals
Dual seal
Available for standard (Cartex-ASDN) and big bore (Cartex-ABDN) seal chambers
Cartridge
Balanced
Independent of direction of rotation
Double pressure balanced
Integrated pumping device
Ideal for use in ANSI process pumps
Universal applicable for packings conversions, retrofits or OEM
Ideal seal for standardizations
No dimensional modification of the seal chamber necessary, small radial installation height
No damage of the shaft by dynamically loaded O-Ring
Extended service life
No damage caused by dirt entered during assembly
Straightforward and easy installation due to pre-assembled unit
Process industry
Petrochemical industry
Chemical industry
Pharmaceutical industry
Power plant technology
Pulp and paper industry
Water and waste water technology
Mining industry
Food and beverage industry
Universally applicable
ANSI process pumps
Shaft diameter:
d1 = 25 ... 100 mm (1.000" ... 4.000")
Other sizes on request
Temperature:
t= -40 °C ... 220 °C (-40 °F ... 428 °F)
(Check O-Ring resistance)
Sliding face material combination BQ1
Pressure: p1 = 25 bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)
Sliding face material combination Q1Q1 or U2Q1
Pressure: p1 = 20 bar (290 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)
Barrier fluid circulation system:
p3max = 25 bar (363 PSI)
Δp (p3 - p1)ideal = 2 ... 3 bar (29 ... 44 PSI),
7 bar (102 PSI) for barrier media with poor lubricating properties)
Pump startup:
Δp (p3 - p1)max = 25 bar (363 PSI) allowed
Recommended supply medium:
max. ISO VG 5
Axial movement:
±1.0 mm, d1 ≥75 mm ±1.5 mm
Seal face: Silicon carbide (Q1), Carbon graphite resin impregnated (B), Tungsten carbide (U2)
Seat: Silicon carbide (Q1)
Secondary seals: FKM (V), EPDM (E), FFKM (K), Perfluorocarbon rubber/PTFE (U1)
Springs: Hastelloy® C-4 (M)
Metal parts: CrNiMo steel (G), CrNiMo cast steel (G)
1.ISO9001:2008
2.Material and standard: per customer requirment.
3.Quality control: 100% in house inspection
4.High Quality
Equivalent to GLF pump seal