Product Specification | ||
Applicable fiber | SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) | |
Diameter of cladding | 80 -150μm | |
Diameter of coating | 160 – 900μm | |
Typical splice loss | SM:0.02dB, MM:0.01dB, DS:0.04dB, NZDS:0.04dB | |
Return loss | >60db | |
Fiber cleaved length | 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm ) | |
Splicing program | 40 groups | |
Operate mode | Manual, Automatic | |
Auto-heating | Available | |
Typical splicing time | 6 seconds | |
Tube heating time | 20 seconds for 60mm and 40mm shrinkable sleeves | |
Fiber view magnification | 250X(X or Y view), 125X(X and Y view) | |
Viewing method and display | 2 CMOS cameras, 4.3 inch color LCD monitor | |
Storage of splice result | 4000 results | |
Loss evaluation | Available | |
Tension test | 1.8-2.2N | |
Interface | GUI menu interface, easier operation | |
Battery capacity | 5200mAh Li-battery, typical 250 cycles(splice and tube heat) | |
Power supply | Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V | |
Electrode life | More than 4000 ARC discharges, can be replaced conveniently | |
Terminals | USB 2.0 port, for uploading splice results and upgrading software | |
Operating condition | Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s | |
Dimension | 160mm(L)x136mm(W)x140mm(H) | |
Weight | 2.10kg including battery | |
Package | Packed in carton with protection foam, Size 43cm*37cm*27cm, G.W.6.5kg |