Brushable Polyurea Coating for Swimming Pool Use
Polyurea LC-1450
Protection Polyurea Material
Production Description
The coating system consists of amine-terminated resin, arylamine chain extender and MDI prepolymer. The product is dual-component, self-cured and thick coating anti-corrosion material. Polyurea coating is flexible, rigid, dense, continuous, seamless, super performance in waterproof, anticorrosive and protective.
Recommended Applications
This product is applied for anticorrosion, waterproof, protection for kinds of concrete substrate, metal substrate and others.
Product Characteristics &Physical Properties
Property |
Result |
Appearance (Visual inspection) |
Component A:Light yellow clear liquid Component B:Various viscous pastes |
Density (g/ml) |
Component A:1.04 Component B:1.02 |
Drying Time(25℃,RH=60%) |
Surface drying time: ≤4 hours Hard dry time: 24 hours Operating period ≤ 20 minutes |
Color |
grey |
Gelation time |
20-30 minutes |
Solid content |
≥98% |
Weight mixing ratio A:B |
1:1 |
Tensile Strength (MPa) |
≥4 |
Tear strength (KN/m) |
≥65 |
Elongation (%) |
≥300 |
Hardness (Shore A) |
85±5 |
Wear resistance 1000g,1000r/mg |
≤22mg |
Consumption |
1.2 kgs is needed to brush 1m2 at 1mm thickness. |
Recommend thickness |
1.5mm to 2.0mm |
Application method |
Roller brush |
Package |
Component A: 20kg Component B: 20kg |
* Drying time is temperature, humidity, and film thickness dependent.
* Coating equipment status determines the property of coating.
Notes:
Application methods: Brush or board brush, scraper.
Conditions for application:
1). Before application, the substrate must be completely solidified, the surface is dry, the base is smooth and clean, and the metal base is free of rust and holes.
2). The optimum application temperature of polyurea is more than 5℃.
3). The surface temperature of the substrate material should be more than 3℃ above the dew point during construction to prevent the condensation of water droplets.
4). Maximum relative humidity is not greater than 80%.
5). Construction surface must be free of grease, dust and other pollutants.
Packaging:
A component 20kg/drum and B component 20kg/drum
Storage:
(1).The A component is affected by moisture and must be protected from moisture contamination. Containers are factory sealed with an inert gas to prevent contamination. Keep all containers tightly closed during storage. For further storage after opening, containers must be purged with nitrogen gas or dry air and tightly sealed to protect from moisture contamination.
(2).Store drums and pails in a cold, dry and ventilated location between 15 ℃ and 40 ℃.
(3).Twelve months in sealed unopened containers.
(4).Keep away from fire and heat source.
(5).Keep away from rain and sun.
Shipping:
10 days upon receipt of payment by shipment on Shanghai/ Qingdao Port.
Dongying Aonuo International Trade Co., Ltd.(Aonuo International) is the most professional pure polyurea supplier both in China and Asia Pacific. It relies on the R&D Center of Pure Polyurea in China, practical experience in polyurea for more than 20 years and professional in the polyurea both technology and application.
Based on the high requirements for quality,we have established long-term mutually beneficial business relationships with all of our customers in the past twenty years.
1.Q: Are you a factory or trading company?
A: We are factory.
2.Q: Where are you located? What’s your shipping port?
A: We are located in Dongying, Shandong Province, East of China, 2 hours high train from Qingdao.
Usually ship from Shanghai or Qingdao, or depends
3.Q: What is the payment terms?
A: T/T, or L/C at sight .
4.Q: How can I get some samples?
A: Sample is available
Contact us