Brass compression Copper stop end fittings
TAIZHOU BAITONG COPPER CO. LTD
TAIZHOU BAITONG COPPER CO., LTD is a group company with one factory and one export company.Our company mainly produces and exports brass ball valve , angle valve, bib cock,flush valve and valve accessories to international market such as Europe, South & North America, Africa, Middle East etc.Our products are all strictly controlled at every step during designing, producing, packing and quality controlling process. We also obtain certificate of ISO 9001 management system and SGS .We will keep optimizing our products .Adhering to the rules of promoting "mutual benefit and common development", we devote ourselves to set up a favorable business relationship with all our clients. We care about our clients, today, tomorrow and forever!Welcome to call and visit us!
Q1:What’s your main port of lading?
A1: Ningbo
Q2: What is your MOQ?
A2: Usually our MOQ is 2,000pcs. But we accept lower quantity for your trial order.
Q3: Could I buy a sample before place the order.
A3: Yes,it is OK. Welcome to your samples orders.
Q4: What is your main market?
A4: Middle East and European, America,Southeast Asia .
Q5:IF Products have some quality problem,how would you deal with?
A5:We will responsible for all the quality problems.
Thank you very much for your visiting. If any product information that you'd like to know, please contact us .
Instructions
1. Use a tube cutter on the tubing to cut to length and assure a clean straight cut.
2. Prepare the end of the tube with a deburring tool to assure a surface free of burrs.
3. Slide the nut and then the ferrule onto the tube. The thread end of the nut must face out.
4. Insert tubing into the fitting body, making sure the tube is bottomed out on the fitting shoulder.
5. Assemble the nut to the body, hand tight.
6. Tighten the nut to the body using a wrench to the number of turns indicated in the table to the right.