Brass body ultrasonic smart water meter 15mm

ISO4064: 2014/OIML: R49-2013
"GB/T778.1-2007 Measurement of water flow in closed full pipes Drinking cold water meters and hot water meters Part 1: Specification"
"BT 778.2-2007 Measurement of water flow in closed full pipes Drinking cold water meters and hot water meters Part 2 Installation requirements"
"GBT 778.3-2007 Measurement of water flow in closed full pipes Drinking cold water meters and hot water meters Part 3 Test methods and test equipment"
"CJT 434-2013 Ultrasonic Water Meter"
"JJG 162-2009 Cold Water Meter Verification Regulations"
"GB/T778.1-2018: Measurement of water flow in closed full pipes, drinking water and hot water meters. Part 1: Specification"
"GB/T778.2-2018: Closed-type full-pipe water flow measurement, test methods and equipment for drinking water cold water meters and hot water meters. Part 2. "
The factory verification is based on the standard of the People's Republic of China National Metrology Verification Regulation "JJG162-2009 Cold Water Metrology Verification Regulation".

Outline dimension

Product Components:

Ultrasonic pipeline:The meter’s body (pipe) structure has no mechanical moving parts and no wear/tear. Which makes it maintenance free. It is resistant to any disturbance of ripple flow, which make the measurement highly accurate. The structure of the pipe is simply built to overcome the high pressure loss and eliminates any leakage.

Transducer:Adopting High-performance piezoelectric devices, makes the metervery stable and highly accurate. The reflector material is stainless steel which prevents all sediments wear resistance, impact resistance, aging resistance, high temperature resistance, corrosion resistance... etc.

Calculator:
Receive signals from flow sensors and temperature sensors for flow calculation, storage, display systems, data transmission, etc.

LED Menu
User can use magnetic rods to switch between display screens, view the relevant data measured by the instrument. The meter displaysthe data in a round robin menu structure.
Among the parameters displayed: Instantaneous flow (m³/h), cumulative flow (m
³ ), screen detection, table address, cumulative working time (h), date (year/month/day), caliber, software version…etc. As shown in the picture below.

Note: The LCD display can be customized according to customer’s requirement.

Communication and networking

Multi-Communication
Wired communication :M-BUS -RS485 -Protocol: EN1434, Modbus, CJ188
Wireless communication :Lora: 470MHz,868MHz,915MHz -LoraWan: 470MHz,868MHz,915MHz -GPRS/GSM: Local mobile operators' support is required/needed.
NB-IoT: Local mobile operators' support is required/needed.

Remote reading the meter data from
The whole system mainly consists of ultrasonic water meter with Lora (MBUS, RS485)communication, collector &repeater and management system.

1. Installation and Connection Requirements:
Installation should be strictly in accordance to the site professional engineering design, and alteration without engineers permission should be strictly prohibited.
2. Instrument Installation Position:
Installed in vertical pipeline for upward (or oblique upward) flow of liquid, followed by horizontal pipeline, try to avoid downward flow of liquid. (or oblique downward) flowing pipes to prevent liquid from running with the gravity and create air pockets.
Installation position should not be selected at the highest point of pipeline direction to prevent abnormal measurement due to bubble accumulation in pipeline.

3. Installation method
Cut off the installation instrument of the water supply pipeline and set aside the
location of the installation instrument as shown in the figure.
Concentric alignment of instrument,
Pipeline and tightening of pipeline blade and instrument thread with the appropriate wrench
Instrument installation completed.

Troubleshooting
a )The water meter shown as :
It means that the battery is not enough, and the battery should be replaced assoon as possible.
b) The water meter is reading negative:
Check whether the flow direction is reversed. If not, please contact usimmediately.
c) Abnormal or random beating of cold-water meter data:
Installation position is incorrect and installed at lower water level.
The front and rear straight section is too short, the bend is too big, and thediameter of the pipe before the table is large.
d) Water meter has flow and no temperature:
Please do not dismantle it manually and contact us immediately.

Transportation and storage
1. The water meter should be stored in the original package, the ambient
temperature is 5-40℃, and the air is free of corrosive gases.
2. when the water meter is stored on the shelf, the stacking height of the boxes
should not be more than 5 boxes.
Disclaimer
1. This water meter is used in residential, commercial and light industry (E1 level) and
installed indoors in a fixed water meter (B level).
2.MWmeter instructions do not contain any explicit or implicit warranties. MWmeter has
the right to modify and revise the instructions. If there are any changes without
notice, all the actual products will be the main products.
Please contact us if you have any questions or concerns.

Dear Customer! If you are interested in our Heat meters, please (click) contact our customer service! Thank you!

Provide a variety of flow meters, water meters

    Shanghai Mingwan Intelligent Instrument Co., Ltd.Company Profile:Shanghai Mingwan Intelligent Instrument Co., Ltd. is a high-tech enterprise established in 2010. Mingwan Instrument is a manufacturer of water and heat meters with a history of 10 years.

    Mingwan is a high-tech enterprise specializing in the development, production, sales and technical service of intelligent instrument technology. The product range includes: ultrasonic heat meters, mechanical heat meters, ultrasonic water meters, volume water meters, single jet and multi-jet mechanical or magnetic drive water meters, lora water meters, NB-IOT water meters, and other flow meters, electronic modules, and charge management system solutions Solution and system integration. All instruments are direct reading or remote transmission: pulse output, M-BUS, RS485, GPRS, LoRa, LoRawan, NB-IOT remote transmission.

    The company has three standard SMT production lines, 10 heat meter test benches, 10 water meter test benches, 30 related testing equipment, and an annual production capacity of 1.5 million sets. The annual testing and measurement work complies with the strict national regulations. The company is currently a large-scale, multi-variety, and fully-equipped manufacturing enterprise in China. It is an ISO9001: 2008, ISO 4064 quality system certification enterprise.

    We have the right to import and export independently. After more than ten years of product export and research and development, we have now become the designated manufacturers for OEM processing in Europe and the United States. Through cooperation and the introduction of foreign advanced technology, the quality of our products is reliable and we continue to meet the domestic market demand At the same time, 500,000 water meters and 400,000 heat meters are sold to more than 40 countries, including Southeast Asia, Europe, America, Africa, and Russia, and are favored by customers.

    We have ten years of design and development experience. We have a team of professional engineers and advanced technology, and efficient after-sales service. We are willing to provide OEM and ODM products and solutions for all partners. We use flexible and responsive mechanisms to improve our communication efficiency.We look forward to contacting and cooperating with people from all walks of life, striving to meet your special requirements and providing you with quality products and services.

1.We can do the designs according to customer’s requirements.

We can open their own molds according to customer’s requirements.
2.Small order is welcome, the MOQ is 1 pc.
3.Sampling inspection for each order.
4.Safe packing.
One by one test for the sample order.
5.100% factory direct sale
6.Prompt delivery.
We can offer you a good after-sell service.
7.Support OEM according to your requirements;
8.We are looking forward to contacting and cooperation with all circles,and try our best to meet your special requirements, and supply you with our excellent quality products and services.

Q:Why choose you ?
A:We have professional team of workers,service and testing equipments,and we have our own factory, so our price is reasonable.
Q:Do you offer customized packing?
A:Yes!All of our products can be packed as your requirement.
Q:Could you print our company logo on the nameplate and package?
A:Yes,we can.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Q: Can I get samples from your factory?
A: Yes, Samples can be provided.
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment. or L/C.