Product name | Drain valve |
Body Material | Brass |
Handle Material | A3 with nickel plated |
Size | 1/4" NPT F*F |
Pressure | 200 psi |
Sealing material | NBR |
Applications | compressors |
Product Name | Brass Water Drain Release Cock Valve for Air Compressor & Tank | |
Valve Type | Stop Cock | |
Valve Function | On/Off | |
Inlet | ||
Connection Type | Pipe | |
Pipe Connection Type | Threaded | |
Pipe Size | 1/8" to 1/2" | |
Thread Type | NPT/BSP/BSPT, and other threads | |
Gender | Male | |
Outlet | ||
Connection Type | Unthreaded Hole | |
Valve Operation | Handle | |
Handle Style | Wing Nut | |
For use with | Water,Oil | |
Max. Pressure | 200 Psi @ 250°F | |
Temperature Range | -40°F to 350°F | |
Seal Type | Soft + Hard | |
Body Material | Brass |
Hi-Tek drain cock valve | Other drain cock valves |
1. The top of body hold the handle firmly so that it won't fall off. | 1. Handle is pressed with the body, which is crooked and easy to fall off |
2. Flexiable O-ring and completely suit the groove,with strong sealing | 2. Dented rubber ring,lack of flexible and bad in sealing |
3. Dual sealing:Soft sealing+hard sealing,no leak | 3. Sealed with dented rubber ring,easy to leak |
4. Smooth and bright surface, even color and luster, without defect such as pore-free and crackle etc. , screw thread without burr | 4.Surface with rough edge, burr or other defects ,easy to leak and broken even hurt operator's hand |