Bonfiglioli reverse WPA series worm gearboxes
Introduction of WP Series worm gear motors, gear speed reducers:
1. Features:
1) High quality aluminum alloy Motovario like gear box, light weight and non-rusting
2) Large output torque, stable transmission with lower noise
3) High heat-radiating deficiency, elegant shape, durable service life and small size
4) Suitable for omni-bearing installation
2. Advantages:
1) Smooth in running and small in volume
2) High in radiating efficiency
3) Durable in service life
4) Work long time in dreadful condition
5) Completely sealed and non-rusting
3. Installation
1) The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2) The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3) The diameter tolerance zone of input and output shaft is H6, the holes of fittings (such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6) When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
4. Usage
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method, output shaft structure, input and output shaft direction and revolving direction accord with required.
5. Technical data:
Torque: 2N.m-3022N.m
Input speed: 1000r/min, 1500r/min
Output speed: 0.30-419r/min
Power: 0.04KW-15KW
Specifications table:
Table 1: Type Expression of This Worm Gear Reducer
W | Worm gear reducer | |
P | Box structure | P-whole, D-Separate |
W | Box model | W-universal, Non-code-basic |
E | Unit structure | E-Double, EE-Multistage, Non-code-basic |
D | Connector of input shaft | D-with motor flange, Non-code-basic |
K | Structure of output shaft | K-hollow, Non-code-basic |
A | Arrangement of input shaft | A-input shaft is below |
S-input shaft is above | ||
O-Output shaft is upward | ||
X-Output shaft is downward | ||
T-Input shaft is upward | ||
Non-code-universal | ||
50 | Center distance | 50-80 |
600 | Reduction ratio | 1-600 |
B | Shaft direction | B |
Table 2: Technical Data
Center Distance | Reduction ratio | Model |
40 | 10/15/20/30/40/60 | WPA WPS WPO WPX WPDA WPDS WPDO WPDX WPW WPWA WPWS WPWO WPWX WPWT WPWD WPWDA WPWDS WPWDO WPWDX WPWDT WPWK WPWKA WPWKS WPWKO WPWKX WPWKT WPWDK WPWDKA WPWDKS WPWDKO WPWLX WPWKT |
50 | 10/15/20/30/40/60 | |
60 | 10/15/20/30/40/60 | |
70 | 10/15/20/30/40/60 | |
80 | 10/15/20/30/40/60 | |
100 | 10/15/20/30/40/60 | |
120 | 10/15/20/30/40/60 | |
135 | 10/15/20/30/40/60 | |
155 | 10/15/20/30/40/60 | |
175 | 10/15/20/30/40/60 | |
200 | 10/15/20/25/30/40/60 | |
250 | 10/15/20/25/30/40/60 |
Promise: One year warranty and free technical support.
Welcome to send inquiry, kindly please leave a message below or contact Ms. Marina via:
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier