Brand Name: Grace
Model Number: 4# -10#
Standard: ANSI
Material: Stainless Steel
Finish: Plain
System of Measurement: Metric
Thread Spacing: Coarse
Thread Fit: Class 5g6g
Thread Direction: Right Hand
Package Type:Bag+Carton+Pallet
BM = 1D studs are generally used for the connection between two steel connected parts; BM = 1.25d and BM = 1.5D studs are generally used for the connection between cast iron connected parts and steel connected parts; BM = 2D studs are generally used for the connection between aluminum alloy connected parts and steel connected parts. The former connector has internal thread holes, and the latter connector has through holes.
2. The threads at both ends of the equal-length double-headed stud should be matched with nuts and washers for two connecting parts with through holes. One end of the welding stud is welded on the surface of the connected parts, and the other end (thread end) passes through the connected parts with through holes. Then a gasket is inserted and a nut is screwed on, so that the two connected parts are connected as a whole.