Boiler parts used black car engine oil burner / multi fuel burner

 Boiler parts used oil burner / multi fuel burner

Specification:

Features:

1.Various fuels are applicable, e.g. used engine oil, used vegetable oil, used crankcase oils, used Glycerin, used Hydraulic oil, used synthetic oils, waste machine shop cutting oil, waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc., as well as regular oils, such as diesel, etc.

2. Automatic ignition, workers-nursing unnecessary.

3. Flame adjustable freely by air-inlet controller easily; from the "Observing Window" operators can easily see changes of the flame.

4. All parts tested thousands of times and improved to be of good quality and reliable.

5. All errors readable from the front panel, thus burner is just "Smart Burner"!

6. Complete fuel burning ensures very low emissions, reducing pollution as much as possible.Environmentally -friendly, Exhausting air complies with the requirements of EURO III;

7. Big oil tank optional, as big as 100L container for holding waste oil, pumping system is held at the top to pump waste oil into burner machine; At the same time hold the burner machine during shipping from damage;

8. There is heating instrument at the bottom of big oil tank to pre-heat fuel before pumping, esp. considerate for using in cold area.

9. Double safety design for PC program.

Waste oil burner packing:

1. Sea packing: Plywood box with foam in protection.
2. Express packing: Carton box with foam in protection.
3. Delivery time: 1-5 days after receive payment.

Optional 100L preheat oil tank:

1. Big oil tank, 100L, steel plate, to contains fuel as much as possible when using.

2. There is a heating instrument at the bottom of the oil tank with temperature controller to pre-heat fuel before pumping, esp. considerate for using in cold area.

FAQ:

1.Are you manufacturer?
Yes,we produce waste oil burner, heater and boiler for 11 years.Has been exported to 105 countries.

2.When the product can be shipped?
Less than 10 sets, can be sent in 5 days.
More than 10 sets, can be sent in 10 days.

3.Can you export to EU country?
Yes, all our models are CE approved. The quality can match the request of EU.

4.I need to assemble it or not after arriving?
No,do not need to assemble. Each set burner will be sent after assemblage.

5.How to set the value of gauge and the fan damper after arriving?
There is a manual brochure in the package,show all the details of burner.
Actually each set burner will be set and tested well before shipping in order to ensure the best working

condition,do not need to set again, it is okay to keep factory setting.

6.Is there any protection device?
Yes.
a.High temperature protection. Will send signature when the oil temperature reach 160 ℃.
b.Flame out protection. Will send signature when the flame off.
c.High oil level protection. Will send signature when the second float switch floated.
d.Oil using out protection. Will send signature when the time of pumping more than 120 seconds.

7.Where I should connect my thermostat?
There is a terminal including in the control box.You can connect it to your thermostat.Controlled by terminal

instead of power. Can ensure the burner are in ready mode.Can burn at once when need to work. Meanwhile,it can

increase the service life of spare parts, especially for PC board.

8.What is the warranty of your product?
All the product are with one year free warranty and whole life technical support. And each set burner including

a free spare parts package.